Porch Swing Mounting Advice

Hello all -

I've had a porch swing for the past year that I mounted under our covered porch using Eyehooks (like in this image). Well today, one of the eye hooks sheared off during use - right where the metal met the wood. It seems that the back-and-forth lateral load caused stress on the bolt and it weakened. Maybe a crappy eyebolt? Maybe my kids and I swung a little hard on it (hey it's fun!)?

I'm looking for advice on how ELSE I can hang a porch swing using two points in the roof beams of the porch. Is there some sort of metal bracing I can attach to the beams that would better resist lateral loads?

Or maybe I should have screwed in the eyebolts directly flush to the wood? I believe I left a little of the eyebolt out of the wood, which in hindsight, probably allowed the lateral load to apply directly to the bolt.

Just trying to figure out the best way to mount this again so it doesn't shear again!

Thanks all.

Posted May 17, 2021, 4:51 PM UTC

17
Notevenspecial•

Use a larger, more robust eye hook.

3
BBZ_star1919•

I wonder if the bolt and ring combos used on play sets would work better so the weight pulls against a hole in the wood perpendicular to how it is with these hooks.

3
Washedup11•

I would suggest this.

Look at how swings are attached to swing sets - that’s the type of mechanism you want.

3
FatMagicOP•

Yep, this is what I'm thinking. I can't use the "playground swing" style because the metal plate runs perpendicular to the swing and wooden beam overhead. I need the plate to run parallel to the beam. (apologies, I might be flipping perpendicular and parallel in this case, I hope I'm making sense)

I may have found something to handle this though!

https://www.swingsetmall.com/wood-beam-swing-hanger-with-shackle-pendulum/

Only problem... they suggest using a 1/2" carriage bolt with square end to secure into the hole. I don't think I can do this, because using a carriage bolt usually means I would have a nut on top of the beam to secure the carriage bolt. I can't do this because I'm mounting up into a roof beam that is flush with the roof. I would imagine I need a strong wood screw.

EDIT: I now see from the description that it has a mounting plate for the top of the wood. I won't be able to do that. Shoot.

1
FatMagicOP•

This is an excellent idea. We have a playground for the kids with these bolt and rings, so I know what you're talking about.

Basically it's this device here - but it would be nice if the plate was rotated 90 degrees so I can mount it along the roof support beam in the direction our swing is facing.

Thank you BBZ. Will have to keep looking.

2
[deleted]•

[removed]

1
FatMagicOP•

Hey Fundamental - yeah. I've been looking at these, but I need the plate to be flipped 90 degrees so the plate and swing hook are going the same direction (if that makes sense).

Been tricking finding someone that fits that bill (did find something that could work in one of my replies above, but it wants to use a mounting plate, which I can't use).

2