Maximum number of copper clamps on a metal water pipe for grounding?
I failed my LLE by one question, so I’m really salty at the moment. I had a question that I wasted my time on (I know I should have ignored it). It asked the above question, but the only article I could find relating to this is 250.70, which only mentions that not more than one conductor shall be connected to the grounding electrode by a single clamp or fitting unless the clamp or fitting is listed for multiple conductors.
250.70 (2) also doesn’t even mention copper. So that’s fun…
The choices were 1, 2, 3, or 4.
I guessed with 1, which I’m pretty sure is incorrect based off of my test results.
There’s a chance I’m not remembering the question correctly. Trying to answer those questions on such a short time limit is a goddamn nightmare.
Posted May 24, 2021, 12:53 PM UTC
Did it show that you missed that particular question? Also, I don't even see where it gives a maximum number either. Could be that they were talking about conductors and you got that question right.
Thanks, u/FuckMeBabyJesus maybe you’re right.
I’m assuming I got it wrong since my results stated that I missed both grounding and bonding questions. So, if I did get it right, then it was included in a different category.
You're welcome.
There were only two grounding and bonding questions?
If you were taking the test in Tennessee, then there should have been five questions on grounding and bonding (looked up the sheet from PSI covering the test).
I just double checked, and you’re right. It was overcurrent protection that had only 2.
Not sure what questions you are using to study, but the DeWalt Electrical Licencing Exam Guide has questions very similar to those from PSI. I used it for my unlimited journey and contractors test.