Acetylation of secondary alcohols
Has anyone done a simple and quick acetylation of a secondary alcohol on a small scale using acetic anhydride? Preferably without pyridine. Please share the procedure. Thanks!
Posted May 25, 2021, 11:55 PM UTC
Has anyone done a simple and quick acetylation of a secondary alcohol on a small scale using acetic anhydride? Preferably without pyridine. Please share the procedure. Thanks!
Posted May 25, 2021, 11:55 PM UTC
Why without pyridine? Most people I know would use triethylamine instead. Just dissolve the alcohol in anhydrous DCM, add triethylamine then slowly add acetic anhydride. Could be wise to cool in ice if you scale up.
I’ve done this with an aromatic alcohol before but I imagine secondary shouldn’t be too different.
Thanks for the procedure. I hate the smell of pyridine more than almost any other chemical.
Even when handling with a mask, and in a fume hood? I mean I’m right there with you about the smell of almost any amine, but to avoid a chemical due to smell, especially in such a well-precedented transformation, seems like more trouble than it’s worth IMO.
Literally google scholar’d “mild acetylation” and came across this - DOI: 10.1055/s-2001-12321. Seems to avoid pyridine but didn’t read into specifics.
This is why most people I know use Et3N instead, it has a much milder smell. I know pyridine can be rough to work with, the first time I did this acetylation I found a paper on scifinder that used pyridine as both the solvent and base. It was such a pain to even just take TLCs of and cleaning the glass was annoying. That procedure sucked too, gave me really low yields. When I switched to running it in DCM with Et3N I got >90%. This was the first reaction I ever performed in a research lab.
You can use virtually any non nucleophilc amine to run this reaction. TEA, Hunigs base, DMAP, DBU etc etc
natural product chemists use for peracetylation of sugars 1:1 neat acetanhydride + pyridine mix with added catalytic DMAP (few mg), room temp overnight, workup is with water quench followed after 15 min with diluted acid, extraction with ether.
If you don't like pyridine, you can use N-methyl imidazole instead, it works even better, most secondary alcohols don't even require DMAP catalyst if you use NMI
also, alternatively you can work without a base, just add catalytic (10mol%) DMAP and heat in a small volume of acetonitrile as a solvent (or you can use an excess of neat Ac2O)
Have a look at this procedure: An Extremely Powerful Acylation Reaction of Alcohols with Acid Anhydrides Catalyzed by Trimethylsilyl Trifluoromethanesulfonate. I've never attempted this myself, but it looks quite dreamy.
If it happens in 'a fraction of the time' I'd worry about using it, most sugar chemists have horror stories of acetylations boiling out of control!
Sodium acetate and acetic anhydride is a common method to acetylate carbohydrates. I think I used to run it for 5-7 hrs
We stirred our alcohols with 1.5 eqt of Ac2O and 10 mol percent DMAP in DCM for an hour. Acetate esters formed in good yield. Thanks!
At high temps you can do this in a pressure reactor neat.
If you are doing rb flask chemistry then use DMAP as a catalyst. It’ll work for tertiary alcohols as well.
No pressure reactors available. If I can stand the smell of DMAP, I'll try it. Thanks!
Dmap has very little smell. Crystaline solid
As the other person said, you’ll only smell acetic acid when you are done! Dmap won’t be volatile.
Since you are worried about pyridine smell, you will have a lot of acetic acid to deal with just FYI. Make sure you have some ventilation