Aftermarket clutch carnage
reddit.com/gallery/now1avPosted May 31, 2021, 5:58 AM UTC
Posted May 31, 2021, 5:58 AM UTC
I learn this lesson the hard way back in 2012 with a “science of speed” lightened flywheel and clutch kit. I’m my case, it was actually more expensive than OEM at the time. I wanted a lighter flywheel and I figured the original clutch should be swapped while the transmission was out. This new clutch exploded about 15K miles later and made a mess. No dropped clutches or burnouts caused failure, just regular city driving. That was the beginning of my journey to undo all the “performance” mods I put on my car.
This clutch had an easy life too. Well in the land of performance cars at least. I’ve launched it like once and that was quite some time ago.
I noticed something was wrong when I was having a really hard time shifting above 4K rpm. At that point I figured I needed to bleed my clutch hydraulics despite them being new in the past year or two. Then I noticed a metal on metal sound when engaging the clutch. I figured the disk was completely worn but had read about the springs popping out on ACT disks.
Bird Dog Auto Parts: Cheep Cheep, Ruff Ruff
OEM clutch disk is the key
Previous owner put this clutch in shortly before I purchased it. Maybe 20k miles of raw, stock f22 power being unleashed.
I’m always trying to save dollars where I can especially since my car has 215k miles, but this is definitely not a place to do it. Many aftermarket clutches use a photo of the stock clutch and then actually deliver one like this one of mine that broke.
The OE Honda kit will run around $800, but there is an eBay seller that sells the exact OE kit made by FCC for several hundred less. It comes with nachi bearings and Honda/fcc stamped clutch and pressure plate. Enough savings to source a used ap1 flywheel and some tools you may need to do this job.