2006 Toyota Sienna LE front wheel bearing question
I’m replacing the whole knuckle rather than going through the trouble of pressing out/in the wheel bearing.
Any substantial difference between AWD and FWD loaded knuckles? There is a 2x price difference but I can’t visually see any difference. Sorry if this is a noob question.
Posted Jun 1, 2021, 2:52 PM UTC
I looked at Rock Auto and see where you're getting that. It's not that the AWD is cheaper than the FWD (Moog is the same price for both), it's that there is some cheap Chinese crap knuckle available for 4WD and not for FWD.
You're going to replace a Toyota steering knuckle with the cheapest Chinese crap, while paying 3x as much as the Timken bearing would cost to do it right?
If you have to pay somebody to press the bearing for you it will cost about the same with the Timken bearing and the Toyota knuckle vs the junk knuckle and bearing.
Back on topic:
If they were equivalent then Toyota and the aftermarket wouldn't make two parts.
Okay I went ahead and got a timken bearing, I don't have a mechanic so not sure who I will bring the bearing to but I think youre right about quality vs price here. Sorry if it was a poor question I really don't know much about part brands. Do you think a local tire shop would press a bearing?
Look for an automotive machine shop.
An independent repair shop might also do it.
Some NAPA stores have machine shops.