TheRealBigLou•

The issue is placement. The IR is bouncing off the nearby structure and causing the sensor to compensate, underexposing the rest of the scene. If you're able to move it forward and away from those walls, you should get a MUCH better picture.

5
Joe1247•

Yep, that's right.

2
PeterCellarsOP•

Thanks, I moved the one with column forward some and will check it again tonight!

1
colonelbadger•

You could buy a secondary infrared light to help illuminate. That’s what I use with my Wyze cameras and can see my entire backyard. Added benefit depending on position is keeping bugs away from the actual camera.

2
PeterCellarsOP•

I’ll look into a secondary IR, thanks!

1
PeterCellarsOP•

Hi there! Just got a new set of Wyze Outdoors, set up was quite easy. My one issue is the night vision. I’ve tried cycling the IR to Auto, Off, and On, turning the cans off and on, and nothing so far.

Is this just a placement issue? I’ve tried moving the front porch one (with the columns) and it looks better, but only because there are lights being picked up the next house over.

Any help would be appreciated!

1
TheVulkanMan•

You bought the wrong cams.

You should have bought the V3 for this job, since you have low light available, and you don't need to use the IR LEDs that are reflecting off your walls.

4
PeterCellarsOP•

Good to know, I’ll look into the V3s. This was a rush purchase because of an ongoing issue at my parents’ house, so any information is helpful to get a workable system in place.

1

This is the correct answer.

1
smallchipmunk1•
1