How to AFK without melting your GPU?

PSA

So due to IRL stuff even in the 2-3 hours I do get to play Elite I have to go afk from time to time.

My issue was that on stations or having landed anywhere the gpu temps skyrocket to 80+C which might be fine when playing, but I wouldn't want to keep it there while I'm afk for an unknown amount of time. So I used to quit the game, but we all know loading sucks, or you just can't end the session because you don't want an empty settlement.

Finally I found a solution. No matter where you are, by opening the galaxy map the load is taken off the gpu and I can afk for longer since it will stagnate at around 45-50C.

I thought this might help someone else as well.

Posted Jun 13, 2021, 12:25 AM UTC

00
GaneshasnackCMDR•

I experience the same. Thanks for the tip!

2080 Super

4
ObjectiveBastard•

Wait, WHAT? You're actually getting a 2080 to near overheat... In ED? Horizons runs smooth on a GTX 950M, doesn't even feel particularly hot...

That's some optimization, lol. /s

1
the-real-keloot•

clean the dust out of it

3
MyFellowMerkins•

You could also shut down the game.

2†
Things_I_DigCMDR Mr. Moozh•

I like to fly out to deep space on a full fuel tank and turn off everything but life support. GPU runs much cooler when I drop out of supercruise and there's nothing close enough to show on the nav panel. A bonus of this method is a lot of creepy ambient space noise.

2
Gygax_the_GoatIND COBRA mkIII G2 VR•

Thats harsh.. is it a laptop? Which GPU?

1
qplungOP•

Desktop. It's a 2060 oc that boosts to 1950 Mhz. It doesn't help that it's below an i7 10700k that also likes to generate a lot of heat.

1
XXXSporkCMDR Capt. Zap Brannigan•

I have a WC GPU so temps aren't a problem. When I AFK in a res site I just get horrible frame rates after a while due to particle buildup in the area. I'll have to give this a try. o7 CMDR!

1
szymciu•

Clean the dust of it and make sure there's enough cold air entering the PC case. Change thermal paste on the GPU, if you feel like you can do it.

Otherwise 80°C on the GPU isn't too high, I'd say it's a normal temp on 100% usage on a stock graphics card.

1
qplungOP•

I'm a bit hesitant on chamging the thermal paste on it by myself. Normally I wouldn't, but the current market makes me extra afraid to somehow mess it up. I might take it to a nearby service.

It's really the 10th gen i7 that's killing my thermals. It's cooler manages to keep it around 60ish unless I play cyberpunk which gets it to 70, but it generates a lot of heat that I think is beyond the airflow of the case.

I'll clean it out in any case.

1
szymciu•

I realized I'm pushing out more air then I'm pushing in and after reversing one fan i reduced temps in my entire PC by 2°C. Do make sure that enough cold air is pushed in and that hot air is vented out :D

Alternative is using heatsinks :D

1
eddyxx•

Set the framerate limit to 30hz and underscale to 0.50.

30 Fps with no stress

1