How do I learn to read this spark plug? Can I get tips for my 2010 Chrysler Town and Country 3.8L?

How do I learn to read this spark plug? Can I get tips for my 2010 Chrysler Town and Country 3.8L?

Posted Jun 14, 2021, 11:51 PM UTC

38
AutoModeratorMOD•

Thanks for posting on r/MechanicAdvice! This is just a reminder to review the rules. If you are here asking about a second opinion (ie "Is the shop trying to fleece me?"), please read through CJM8515's post on the subject. and remember rule 3a, please post the year/make/model of the vehicle you are working on. If this post is about bodywork, accident damage, paint, dent/ding, questions it belongs in r/AutoBody or r/Diyautobody If you have tire questions, check out r/howsmytire and ask there. If you dont have a question and you're just showing off it belongs in r/Justrolledintotheshop This is an automated reply

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1
roosterb4•

That one looks good just Google it

1
third_boob•

What this man means is google the spark plug model no. You will find the gap distance and you can measure it if the spark plug is good or not.

1
18179388•

Looks like trash and should be replaced, the tip is brown and that’s a good burn not too rich not too lean. The porcelain where it meets the metal is leaking compression from the seal. You can see the carbon build up and junk building up. Definitely a good time to do them. If it was black tip would indicate rich mix, too much fuel and white tip means lean mix.

1
WaitingInLineOP•

Thank you I am resealing the top end because I know it has a vacuum leak somewhere and it makes sense to do the plugs at the same time but it’s not misfiring at all.

1
WaitingInLineOP•

Does that mean the plugs weren’t torqued or the plugs are defective

1
18179388•

Plugs were probably torqued fine, the seal goes bad on all cars and plug brands at around 60-100 k KM ( Canada here) around 30 -50 k miles

2
WaitingInLineOP•

Thanks for answering my question that was the explanation I was hoping to hear

1