Trident Z Royal Elite

So I grabbed a kit of this RAM. It’s XMP is rated 14-14-14-34 at 3600mz with 1.45 voltage. I grabbed two sticks of 16gb for a total of 32gb. My last ram was Hynix and couldn’t be pushed very far and since I’m on a 5600x I didn’t grab the 4000mz kit as my cpu doesn’t like it. I figured any gains I get will be from latency vs mhz. My question is how far can I expect to push it or is there any way to get my memory controller to accept over 3733. RAM OCing is my biggest weakness so thank you in advance and forgive my dingusness.

Posted Jun 29, 2021, 10:16 PM UTC

211
Ben4425•

Read this very carefully to learn about memory overclocking.

I found it very helpful when I overclocked my B-Die rated for 14-14-14-34 at DDR4-3200. I was able to boost that to 14-14-14-34 at DDR-3600 at 1.45 V (like your memory) and I was able to reduce the sub-timings to get a couple more percent of performance.

Yours may go a bit farther but you are already at 1.45V so you may need more voltage. That is potentially bad because 1.45 or 1.5V is (I think) about as far as you can safely push this RAM.

3
UrWrongAllTheTimeOP•

I’m actually at 14-14-14-34 at 1.35 but can move it more. Xmp worked right when I plugged it in but didn’t adjust power. I’m seeing crazy tight timings in ram calculator but need to look more when I get home to see what it can do at 3733 as that’s as far as my CPU will allow.

1
adhyaksa17•

Hi, try to update your bios to the latest stable bios, then try to 3866 or 3933 because some people got problems with 3800 on their setup with ryzen 5000s. Let the timing loose firstly and check you can boot or not. If you can it will be good.

For the memory, it is a pretty good memory from gskill, you can try 3733 cl13 1T with GDM off if you can.

2
ilax92•

That’s a nice kit. Would be nice to get those same timings but at 3800mhz.

1
UrWrongAllTheTimeOP•

Yeah that's what I was hoping for but my memory controller won't go above 3733.

1
damaged_goods42010900k 54/50 HT off @ 1.3v/Apex XII/3090 KP HC/32gb 4533 c16 mem•

Ooh that's unlucky

1

That RAM should be able to do 3800MHz CL14-8-15-14 at 1.5v.

1
UrWrongAllTheTimeOP•

Nice! I'll push toward that. Thank you kindly!

1
[deleted]•

[removed]

1
emissary42Team Hardwareluxx•

If you don't mind, I'd be interested in a Thaiphoon screenshot from your kit for my B-die list at Hardwareluxx :)

1