Source
r/FullControl•
FullControlGCode

Lampshade design file freely available from the parametric design folder on the FullControl github (link in comments). Beware(!) this is not easy to print (large overhangs) and the design is not easy to understand (lots of maths)!

Lampshade design file freely available from the parametric design folder on the FullControl github (link in comments). Beware(!) this is not easy to print (large overhangs) and the design is not easy to understand (lots of maths)!

Posted Jul 8, 2021, 7:37 PM UTC

96
yog290294•

I am really thankful for sharing your work with the community. I am going to try this lamp to print in my UM2+. I will post photos after completion.

2
FullControlGCodeOP•

Thanks and no problem! Let us know if you have trouble with the overhangs. It was a little temperamental for mine but worked so I didn't need to further optimise parameters. I bet some small changes to layer height or similar will overcome problems with overhangs if you have them though. Good luck!

1
FullControlGCodeOP•

Link to github:

https://github.com/AndyGlx/FullControl-GCode-Designer/blob/master/ParametricDesignDemos/FullControl_GCODE_Designer_Heron02c%20-%20Lampshade.xlsm

1
FullControlGCodeOP•

Feel free to ask any questions!

1
lawser97•

Looks great!! What printer did you use?

1
FullControlGCodeOP•

Thanks. It was an Ultimaker 2+ with a 0.6mm nozzle in PLA. Fans on full and no enclosure or anything like that

2