Plate recommendations for size 14 skates

Hardware, wheels, & upgrades

Hi everyone! I recently ordered some Riedell 220 boots in size 14 but I’m finding that I have very limited options in terms of plates at that size. The plates on my current skates (Sure-Grip Boardwalks, size 14) are the Sure-Grip Super X plate in size 10 and they have a wheelbase length of 210 mm. I wanted to get something a little nicer on my new skates, but the biggest size I’ve been able to find on nicer plates seem to only come in a wheel base of 198 ~ 200mm. I’ve read and heard from local skaters that many rhythm skaters (the style of skating I’m most interested in) tend to like somewhat shorter plates on their skates, and that a 198mm plate for my skate size would work well if that’s what I’m going for. Also, it seems like certain plates recommend a 198mm plate for size 14 (Sure-Grip Avanti) while others only list size 13 as fitting their 198mm plate (Powerdyne Reactor Neo). Wondering if anyone had any advice. Right now I’m leaning towards the NEO but I’m open to suggestions!

Here’s a link I found with some info on plate sizing: Link

Posted Jul 28, 2021, 7:09 PM UTC

38
rbjohnson915•

Well, I also have some older Riedell 220s that I bought from a skate friend, and they are also 14s (the curse of big feet). I actually remounted a plate I took off of my previous skates (Riedell 120s, size 13). Depending on how you skate, or the style you are trying to skate, will determine the plate you want. I use a Pilot Falcon Plus plate, and those plates are VERY responsive to EVERY move. They are a 8.00, according to what was suggested on the site Atom Skates Size chart.

I'm seriously debating on getting the Arius Plate. I have a friend that has this plate and he FLIES around the rink! For the type of skating I like to do, which is a lot of dancing, spins and snaps, I need something responsive that doesn't take a lot of effort to do tricks. If you think of getting the Arius Plate, get it in the 281mm size.

Hopefully I offered some help to you.

2
telemasterfulllOP•

thanks for the response. I’ll look into the Pilot Falcon Plus

2
rbjohnson915•

You're welcome. Just be mindful of how they move. They can be tightened all the way up, but initially will feel loose. It took me a session to get used to them, and I LOVE them. The only downside is, by them being so responsive, if you overcorrect, you're going down. LOL. I guess it also doesn't help that I skate on clay wheels, which have NO grip...if you thought Fo Macs were slick, the wheels I have are slicker than those. But I love them and I can do a lot of slides and spins! lol

2
Shollern28•

As a size 14 myself I just wear the max size plates that I like. That slight shorter wheel base will make you more nimble in the long run.

I ran size 13 avanti plates for a while. Now I wear a size 12 reactor pros.

It makes you adjust your posture, but its worth the more precise balance in my opinion.

2
telemasterfulllOP•

okay interesting. The size 12 reactor pros are a lot shorter of a wheelbase than I would expect to be feasible. Do you still feel like you can skate fast in those plates?

1
Shollern28•

Oh yeah, I speed skate in them at my local rink, during our fast skates.

I kind of had to relearn how to cross over though with them. Turned out before I wasn't leaning hard enough, and stepped too far forward. With the Reactors, it took 2 session for me to start leaning more, and stepping to the side more.

Its made my crossovers way more powerful.

One think to note, the reactor plates are lower to the ground, than the avanti. I had to size down on wheels because I was leaving grooves in the bottom of my shoes. That and the reactors come with 2 sets of cushions, which were way too soft for me. I swapped them out for a stiffer set I already had at home.

2
Shollern28•

The Avanti plates give me the impression that they were meant for parks or outdoor skating. Because of how high they stood. The reactors feel way more at home in a rink.

2
telemasterfulllOP•

okay cool, one of the big things I was worried about was that the shorter plate would be squirrelly at high speeds. Cool, I think I’m gonna order the size 13 Reactor Neos. Thanks for the advice

2