Intelligent Backup Power - how will it work?

So I have a little understanding on how normal backup generators work and how EVSEs work. But I'm curious on how the Intelligent Backup Power will work specifically, mostly because I'm looking to wire my house this year to get the tax credit.

Normally with a backup generator, you select what circuits you want to run on backup power and move them to a subpanel. Then you put an automatic transfer switch as the main part to the subpanel and it connects to both the generator and to a dipole breaker on your main panel.

And normally an EVSE like the 80amp charger would connect to a dipole breaker and just get power there.

So how will the Intelligent Backup Power work? Will the car feed backward through the EVSE? Will it come with a replacement main breaker that will auto switch in that case ? Or do we need to do the normal generator thing and hook it up to a sub panel? I know the F150 hybrid can supply power to the home now, how does it work for that?

Posted Jul 31, 2021, 7:17 AM UTC

1017
blainestang•

Sunrun is providing the install and the DC->AC inverter and switch box, so they should know for sure if no one here knows for sure.

If you contact them and get good info, let us know!

2
thecrazzyeddie•

Do we know why they’re using an external inverter instead of the onboard? On the spec sheet, it says the onboard charger can export up to 9.6kW on the SR and 17.6kW on the LR. I believe the max draw for the home backup power is 9.6kW.

1
blainestang•

I think the theory is that the onboard charger is bringing in AC from the house and “exporting” it into to the truck’s battery as DC.

1
thecrazzyeddie•

I’m very interested in this because it would increase the cost of the 80A power station significantly. Existing EVSEs are basically glorified plug adapters with an on/off based on negotiation with the vehicle. The onboard inverter is what is actually doing the ”work.”

Looking at the J-1772 standard, they could operate with the full 80A over a normal plug without the DCFC pins and get 19.2kW power. This would of course have the major cost and complexity advantage in the power station by relying on that internal inverter. https://en.wikipedia.org/wiki/SAE_J1772#Charging

Do we have confirmation from somewhere that the 80A stations is actually doing some form of DC?

1
blainestang•

You can see in this photo that the plug from the 80A station has DC pins:

https://www.thedetroitbureau.com/wp-content/uploads/2021/05/Ford-branded-EV-charger-1024x682.jpeg

Presumably the box on the left is an inverter/switch.

1
sotek2345•

No answers, but very interested in this as well. My wife's Mach-e will arrive well before my Lightning and I would prefer to only do the wiring once.

2
thecrazzyeddie•

Just have the electrician run 100A wiring. That will handle whatever you need, even if you end up just putting a 50A receptacle on it for now for the Mach E.

1
sotek2345•

That is my plan - likely with some extra wire length to support whatever box needs to be added for the disconnect

1
Sethodine•

The 80A charger plug actually has DC ports like a CCS plug. So it looks like the 80A station is not just an EVSE, but may also contain an inverter. So it takes DC current directly from the battery, inverts to AC in the station, then sends that to your house.

Likely the 80A station will have separate AC outs that go from the on-board inverter to a traditional tie-in like you would with a generator.

2
Scoiatael•

If I end up with the F150 Lightning, I have a feeling I won't end up using this system. Its probably going to be pretty expensive to get it installed.

2
KennyB12Three•

This is how I'm selling my wife on this truck. She didn't particularly care for the Texas freeze and no power earlier this year.

2
FH_Bunny•

Bingo.

We were already thinking of getting solar since a house in the area had power the entire time during the freeze with solar and Tesla power walls. Now we can have a truck with power wall capability. Perfect for us.

3
QuintusHorace•

I'm very curious about this too. I have solar panels (and an inverter) but no battery for the house and no isolation. That means if the mains go down, I'm out of power (even though my panels could theoretically be generating too).

Really curious how this will work. Would be amazing if I could use solar to charge the truck in the event of a power outage.

2
thecrazzyeddie•

No reason you can’t do this with a disconnect, which will also be required for the F150L to power the house.

The tricky part is getting a transfer switch that would balance the panels with the truck, which I’m pretty sure is part of the functionality of the Powerwall.

1
jojocorodon•

I'm with you...I already have a full house natural gas generator for back up (6Kw) that is wired through a power management box. I did this after after I couldn't get a power wall ordered. So now I can get a truck that is a power wall (gas generators are noisy, and need it only as a back up to the back up). But how are we to do this?

1