r/buildapc•
Kenealy

[Build Complete] So I hear BaPC likes good cable management... (First time builder)

Part list permalink / Part price breakdown by merchant

TypeItemPrice
CPUIntel Core i5-2500K 3.3GHz Quad-Core Processor$204.99
CPU CoolerCooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler$34.99
MotherboardAsus P8Z68-V ATX LGA1155 Motherboard$177.86
MemoryG.Skill Ripjaws Series 8GB (2 x 4GB) DDR3-1600 Memory$38.99
Hard Drive[Maxtor 500GB 3.5" 7200RPM Internal Hard Drive]~~~
Hard Drive[Maxtor 500GB 3.5" 7200RPM Internal Hard Drive]~~~
Video CardEVGA GeForce GTX 560 Ti - 448 Cores 1.25GB Video Card$289.99
CaseNZXT Phantom (White) ATX Full Tower Case$109.99
Power SupplySeaSonic 750W ATX12V / EPS12V Power Supply$129.99
Optical DriveLG GH22NS90B DVD/CD Writer$18.99
MonitorAsus VH232H 23.0" Monitor$129.99

Pictures! (Sorry for the terrible quality)

So I originally started this build way back at the end of October. I ended up build an MSI P67 board along with the processor, memory, and an Antec power supply, having already had an old Antec case and my two hard drives to start with. Unfortunately, the video card I had (an OLD ATI Radeon x1300) refused to work in the board, and I didn't have enough money at that point to buy a video card. After an RMA, I purchases a Gigabyte Z68 board. With my luck, I set everything up and the board refused to post. I tried my ATI card, without it, no memory, 1 dimm... everything.

At this point, I RMA'd the board, found some more money in the budget, took a trip to Microcenter, and bought myself my Asus board and CM CPU cooler. You have no idea how much of a relief it was to finally have a board post first try. At one point I even considered sending everything back to Newegg and just saving for the entire build at once.

I ran that setup from about early November to just after Christmas. I got the NZXT Phantom, SeaSonic PSU, and a Sapphire 6950 then and everything seemed pretty awesome until I went to go play with the video card. At stock clocks and normal BIOS, this thing ran fine, but being myself, I like to get the most out of everything and went for the unlock. To no avail, the card would not do the unlock. Disappointed, I figured I would play with the overclocking, where more disappointment came. Seeing people pull easy 950's on their 6950 probably got my hopes up a little to high, as I couldn't get my card above 900MHz with increased voltage or anything. Considering how cool the card ran (71C on the 900MHz OC, and 74C on a 980MHz OC that wasn't stable), I was a little fed up and RMA'd that card.

About 2 weeks ago, I got my 560TI 448 core and couldn't be happier. Set it to a 900MHz OC and at that point was running faster than I needed, so I didn't push it any farther. Haven't had any problems with this exact setup so far and don't plan to change much either. Possibly a 128GB Crucial M4 when I run into the money and eventually another 560TI, too. Overall, I'm happy with this build and can't see myself build pre-builts anytime soon.

Cheers everyone!

Posted Jan 26, 2012, 2:09 AM UTC

710
Loading comments…