Build question - how smooth is the inside of a stripped upper receiver?
Grabbed an aero blem stripped upper in FDE and the outside looks great and feels smooth as glass.
Inside looks the same but I can feel a grit, like light duty sandpaper, around the inside bore of the upper receiver. Like where the BCG rides. Some parts are smoother than others and feel just like the glass smooth outside.
Questions:
I’ve never felt up a stripped upper before it was assembled and cycled already, nor have I compared a blem aero FDE upper to any other aero FDE upper.
-
is the grittier feel standard practice on uppers, or is that what made this one a blem?
-
any tricks more than sandpaper around your finger and some elbow grease to polish that interior bore out?
-
what would give first, a stainless or nitride coated BCG, or the FDE cerakote finish on the inside of the upper? (Meaning,if it’s too gritty still inside, will the BCG eventually lap it out smooth where it needs to be, or will the upper finish score and ruin the BCG?)
Thanks!!!!!!
Posted Aug 6, 2021, 8:49 PM UTC · edited
It depends on who made your receiver. Higher end receivers generally have better machining than budget level receivers.
No tricks, just run your upper, it'll smooth out over time.
The carrier is steel and the coating is much harder than the cerakote on the aluminum receiver. The receiver will wear long before the carrier.