PC black screened and now is stuck in an infinite Pre-Post Loop
Okay, experienced PC builder here and I am completely stumped. Built a PC for a friend (5800x, x570 Asus TUF WiFI Pro, 3200 MHz 16 gig ram (2x8), 3080ti). Started it up and it went into windows. Loaded the motherboard disk into the disk driver and installed all of the motherboard drivers. Restarted the computer, went back into windows.
As I was tuning some things in windows the computer went black screen and restarted (not a windows error but it seemed like a power issue). On restart Dram light came on and then the CPU light flashes and it just recycles over and over. Can’t POST or get into bios. I tried shorting the jumper, tried removing the CMOS battery, tried using the BIOS flashback button on the motherboard all to no avail. I hooked the motherboard up to another power supply and it still just kept cycling. I tried a different set of ram and reseating the ram and same issue.
Can anyone think of what the hell could have happened during that black screen restart that would cause this? I’m RMA’ing the motherboard because I don’t believe the CPU could have gone wrong or overheated when I had a Kraken AIO on it. Also, overheating would cause throttling or a blue screen not a straight up black screen reset. Any ideas?
Posted Aug 7, 2021, 11:17 AM UTC