Access to the heatsink on NUC8i3CYSM? Help appreciated.

Tech Support
Access to the heatsink on NUC8i3CYSM? Help appreciated.

Posted Aug 18, 2021, 2:36 AM UTC

62
Bgrngod•

Get those screws out. Pull of the foam pads and set them aside sticky side up so you can put them back easily if you want to. Get enough pressure on the right side there to slightly move the frame away from the board and tug it out.

Make sure there is no memory card in the sd slot.

It'll feel like it doesn't want to budge at all right up until it suddenly moves easily and safely.

5
easterredditOP•

Hi all, sorry if this is a rudimentary question. I've looked up other teardown videos of NUC10, Bean Canyon NUC8 and don't recall them being quite as difficult to open up as my particular unit. Namely, the metal extrusions designed to keep you from tampering with the unit don't appear present on most other models (see red).

I've removed every screw I could find (see yellow), and logically thought about taking it out by pulling up and out through the front panel (see green), but unlike other models, there doesn't seem to be an easily grippable USB port or other sufficiently large enough chunk to clasp onto. Plus the mainboard and those ports are just crammed up super tight against the metal chassis and I'm naturally scared of snapping something.

ETA Prime is the only person I've seen do a teardown of this unit, but they were only images of the end result, not a step by step. Of course, he removed all the shielding foams on the left, but I imagine he's pretty experienced with this kind of procedure, please he's a YouTuber who probably got the thing as a review unit.

Do I just need to 1) commit to removing those foam blocks and then 2) finding someway to pry it up and out (any tools recommended?), despite it feeling really tight and dodgy? Am I SOL? Consigned to just periodically blowing air into the vents? Would've really liked to have gotten more uses out of a fresh tube of Noctua NH1 :/

Thanks a bunch in advance!

2