r/Kenshi•
turtleact

How to designate the person who clears the machine / resource node?

QUESTION

I have 5 labourers working on a 2-man copper node and a 3-man iron node and noticed that it's almost always the same two people who haul the ore back to storage.

How does the game determine who clears the machine? Is it possible to pick who does this so I can level the strength and athletics of the other labourers?

edit: A better question to ask is: If there are multiple people working on a machine / resource node when it becomes full, how does the game determine who gets to haul it back to storage?

Posted Aug 22, 2021, 1:25 PM UTC · edited

210
Malchemia•

If you haven't set the hauling job they do it themselves when the outputs full... if you set 1 person to haul to storage & give that higher priority than mining that 1 person will run all the stuff for ya I usually have 1 person hauling to all the storage bins

3
turtleactOP•

I've tried creating a hauling job (iron) and giving it a higher priority than mining but this makes the person a dedicated hauler as he just goes to all the active iron nodes and collects ore whether they're full or not.

My ideal scenario is having 3 people working on a 3-man ore resource then having them take turns hauling ore to storage when the node is full. This way, I get to level strength, athletics, and labouring on all 3 people somewhat equally.

1
YarosanAID•

I think it's always going to be the ones working on the machine that'll clear it. At least, that's how it works for my recruits who tan leather.

1
H4nzy•

Shift+right click on the storage box and put that hauling job as higher priority

Also pro tip: put your after wells in the end of your base opposite to where you have our farms and after storage, so when people have to take care of the farms they also train strength and athletics while running to grab water, I always have one dude that I want to train athletics on hauling water to barrels that are on the opposite side of the base, it works great and saves in a bunch of clicking

1
turtleactOP•

Thanks for the tip!

I tried creating a hauling job but it made the person a dedicated hauler. He was too busy running between the two Iron ore nodes I was mining and the ore storage that he didn't have any chance to mine.

1
H4nzy•

Yeah in this case you need more miners, or you can also make the hauling the secondary job, so when the person fills the mine hell haul it to the deposit

1
NiceGuyKc•

As per my experience, it's usually the last person to join the task. To me, I assigned 4 people to mine a 3-person iron source. Two of them would constantly mine, and two would swap with each other each time it's full, with one hauling the iron to storage while the other runs to take his place. This is just an observation, and I could be wrong about the actual logic behind it, but I hope it helps.

1
turtleactOP•

Thank you for sharing this!

I'll try and experiment with this in mind to see if it is the case.

2
nalkanarShek•

Hauling is done when mine/node reaches full. If workers do their mining in certain pattern it might be always the same person. I usually asign only one with hauling job and all the others that mine that spot without it. In my mind all others will be better in mining (and will work and work and work) while this one guy will be slightly worse as he sometimes hauls stuff to storage. Usually it does not matter much as I tend to have storages close to nodes.

1
turtleactOP•

I'll try and and add hauling and see if it gets me the results i'm looking for. Thanks!

1