What does blinking red on the charging cable actually mean?
(US) I've used the charging cable with the 110v "tail" at my office a few times, basically 8h charge gets me a little bit more than my ride home. Was going to try charging at home over the weekend (haven't been able to get an electrician over to put in a proper 220v outlet) and a few seconds after plugging it in (not even plugged into the car yet), the light-ring around the adapter goes blinking red, instead of solid white. Tried 6 different outlets in various parts of the house, same thing. Thought it was perhaps damaged... and then I plugged it in to an outlet near my kitchen stove (part of a later renovation, I think) and it lights up solid white. Now, I really can't charge the car from the kitchen... but does anyone know what that might mean? https://www.polestar.com/us/manual/polestar-2/2021/article/Charging-status-in-the-charging-cable's-control-module/ says "flashing red" means "Critical fault. Unplug the charging cable from the outlet" which doesn't tell me anything that might fix the problem.
(I'm in New England, so "6 out of 7 outlets are wired wrong" is *entirely plausible* - one thanksgiving, my oven started acting oddly and we noticed that turning up the thermostat also turned on a nearby streetlight - and I have friends who still had knob-and-tube wiring less than 20 years ago. But without other problems I can point to, it's hard to ask an electrician based on a single blinking red light...)
Posted Aug 28, 2021, 5:27 AM UTC