akesterOP•

My Wife and I relocated for a few years for her schooling, and buying homes here is a lot cheaper than renting anything. Eventually, everything not on the wall will get packed up and moved to our new home.

​

From the bottom to the top of the rack:

  • APC UPS - Nothing special, runs the network.
  • Liebert GXT3 - Free dumpster find, runs the servers. I plan on buying another to spread the load out a bit more and get some additional runtime. These are double conversion, but you can get decent deals on Ebay.
  • Atlantia - Dual Opteron 2356, 32GB of RAM. I really don't like this machine and it's counterpart Pegasus. No IPMI and the SAS controllers don't support any hardware RAID.
  • Galactica - My First Server, Dual Xeon L5420, 24GB of RAM. An old machine but still works.
  • Calcoraan - TrueNas server, running 8 3TB Hitachi SAS drives and 8 junk drives. Xeon E3-1220V2 and 16GB of RAM on a Supermicro board. Really slick system, works perfect.
  • Pegasus - Currently a shelf.
  • Grumpy - (Cut out of the frame) - AMD board running as a quorum node for the cluster and running some CUDA workloads for giggles.

Atlantia and Galactica are the two "main" servers, both run Proxmox VE and have a number of virtual machines and containers between them. Both of these machines are ancient, and I plan on replacing both of them with something like an R720 or DL380.

​

The stuff on the wall is all the wiring for the house, I have drops wired in various rooms and some security cameras. All the stuff in the walls and Coax will stay with the house when we move, so I put it off to the side. The equipment there is an Edgerouter X, a POE midspan injector, and a Catalyst 3750G.

​

Like I said, the three 1U servers are all ancient, and I plan on replacing them with some more modern equipment. They " work" but are really showing their age and are really loud. I bought them for use in a colocation facility, so noise initially wasn't a problem, but now they're pretty unbearable.

6
Nopped•

I’d like to know what you named your toaster. 😜

4
Mehammered•

I need to get good at cable management I am so bad at it

3
shetif•

Homelab in my temporary life

2
UNICYCLE100•

Your Calcoraan server. What chassis is that?

2
akesterOP•

Norco RPC-3216. It works well, but I honestly don't know if they make them anymore. I found that one in ebay for about $125.

3
Knurpel•

Good job.

1
tjdiddykong•

I like the wiring setup there. Didn't know they made a patch rack that does 90 degrees like that, can be really useful when you don't have space for a rack unit patch setup! Thanks!

1
DrDemon_12•

I see that you have a passive PoE injector. Is it really worth it?

I am thinking about buying a PoE sitch and found those devices, but I didn't know they existed.

1
akesterOP•

In my case, I already had the switch and didn't want to replace it. It works but it's not as slick as a PoE switch.

2
DrDemon_12•

Thanks for the response!

This seems like a good excuse for buying new toys :D

1
DatDamnZotzz•

Love the cable porn

1