What's the maximum useful space around a table?

At what point does extra space not convert to extra comfort making shots? Like is 5' per side better than 4.5'? Is 5.5 better than 5? Obviously like 7' would be more than you'd ever need.

I'm trying to decide where to place a table within a large room, and want it to be close-ish to one of the walls, but still far enough away that I never have to worry about being able to take a clean stroke.

Posted Sep 14, 2021, 12:23 PM UTC

515
OozeNAahz•

People will quote 5’ on each side and that is technically right. But if you like to stand back to pick your line you might benefit from an extra foot or two.

7
-SeaBrisket-•

I have a 23' garage and wanted to maximize the open space so I went 5' from one end. Friends with longer strokes will occasionally bump into that wall when on the rail though it's never given me an issue. I'd do 5.5' if you have the luxury of space.

3
noocaryror•

Completely agree, on the rail straight across the table the wall is in play at 5’. Plus many players are now using cue extensions

1
KITTYONFYRE•

edge of the cushion to the wall should be your longest cue length + 6 inches. that will give you plenty of space to stroke even if the cue ball is frozen to the rail and you need to shoot perpindicular to it.

make sure to account for any chairs, decorations, and other garbage hanging on the wall.

2
Namssob•

This. However, also consider friends/spectators. If you have people over and they want to watch or gather near the table, that takes up space also. But leaving space for tables, fridge, etc, is key.

3
KITTYONFYRE•

yeah, this is huge - always annoying to ask others to move (or to be asked to move in the middle of a conversation, though I personally generally pay attention to the game enough to not have that happen). definitely considering how and where people will sit is pretty important - nobody wants a cue butt 3 inches from their face.

1
Fire_LakeOP•

hm yeah, i might do +12 or even +15 or something. if the cue ball is right on the railing and im shooting perpendicular, 6in stroke might feel cramped still.

the room is so big it'd be a shame to ever feel cramped on a shot. but i think the cue length + X approach is the most intuitive way to plan it.

2
KITTYONFYRE•

If you want an exact number, do you have the exact table you're going to be putting in the space? You'd never draw your cue past your bridge (obviously): if you set up how you'd set your bridge for this frozen cue ball, perpindicular shot, you will know the exact maximum distance from cue tip to cushion edge.

I just measured this on my table: cushion nose to edge of the table is 6 inches, nose to my bridge is 7 inches max (with my bridge set on the corner of the table). add an extra inch for fun. that gives a distance from nose cushion to wall of cue length (typically 60 inches) + 8 inches. if you want anything on the walls (good idea to not have them blank, REALLY good idea to have something soft like acoustic paneling: hard surfaces suck for sound quality!) then really 6 feet seems like overkill. I doubt you'd really be missing those extra four inches on the other side of the table anyway, even though they'd probably not matter much for cueing.

1

6 feet is 5.84 RTX 3090 graphics cards lined up.

2
Chi_Vape74•

For the price of the 3090 I could almost purchase a Diamond table.

1
gotwired•

If I could walk down long shots from like 15 feet away consistently, I would.

2
yourrack•

I know people say 5' or so, but you really want to be able to step into a shot from the angle you are shooting. I would give as much room around the table as possible.

2
johnsmith1291•

5 ft per side is standard I believe

1
ImPickleRockJust make balls. •

what I did for mine was put painters tape on the floor in whatever size table you're getting then walk around it with my tape measure set to cue length.

1
keyserv•

5 feet on either side is the minimum.

1