Rejected Model 3 Performance Delivery
I arrived at the Dedham, MA location yesterday to pick up my M3P in MSM. Unfortunately, I had to reject the car. The following items were noticeable:
- Left rear door had a scratch in the clear coat.
- Left rear quarter panel had a non-correctable paint chip/defect under the clear.
- Front left mirror molding had excess glue/adhesive showing.
- Front right mirror molding didn't have enough glue/adhesive and was visibly loose/sticking out.
- Front right wheel had a noticeable chip and lots of white stains, almost as if brake fluid was spilled on the wheel.
- Rear bumper had a clearly visible compounding/sanding mark. However the edge of the bumper was a bit burned from someone not correcting it properly.
- Loose molding in-between doors on the right side.
- Rear tail lights were not aligned and sticking out quite a bit, especially the left/charging side. (could easily stick a small finger in)
Interestingly enough, the front headlights were flush, and the frunk/trunk/doors were mostly aligned well. These were actually the things I was worried about going in.
My original order was placed on 8/30. I asked to keep the order, but to reject this delivery/VIN. Always inspect your car before accepting delivery!
https://teslamotorsclub.com/tmc/attachments/img_1293-jpeg.709910/
https://teslamotorsclub.com/tmc/attachments/img_1292-jpeg.709911/
https://teslamotorsclub.com/tmc/attachments/img_1290-jpeg.709912/
https://teslamotorsclub.com/tmc/attachments/img_1289-jpeg.709913/
https://teslamotorsclub.com/tmc/attachments/img_1288-jpeg.709914/
https://teslamotorsclub.com/tmc/attachments/img_1287-jpeg.709915/
Posted Sep 16, 2021, 5:31 PM UTC
The mirror moldings are pretty atrocious. Everything else doesn't look that bad.
A cleared-over paint nib/chip crosses the line for me.