This is my first print with my first printer. Am I that lucky? Ender 3 Max with PLA, did have to use stick glue as it wouldn't stick to the glass even with perfect levelling.

Image
This is my first print with my first printer. Am I that lucky? Ender 3 Max with PLA, did have to use stick glue as it wouldn't stick to the glass even with perfect levelling.

Posted Sep 18, 2021, 4:31 AM UTC

817
appliedphysix•

Lol my first prints were dialed in too. Don't worry, you'll have it all screwed up in no time lol. Welcome!

12
boss53kaiden•

if he wants to fuck it all up quicker i reccomend doing 10+ mods all at once that way you get a fun guessing game of what is causing my problem.

12
appliedphysix•

Ah, a man of culture I see.

8
Eloki12OP•

Foreshadowing 100

1
appliedphysix•

Lol I feel for you, we’ve all been there. Keep at it and it’ll come back around.

1
Eloki12OP•

Came off as-is, no stringing or anything. Almost default settings using Cura

3
hbhakta2624•

For creality glass bed, try z offset plug-in from cura market place. Assuming you have a .4 mm nozzle, set the z offset to -.1mm and try a small bed adhesion print.

1
dfreinc•

perfect level

no stringing.

no elephant's foot.

hull hole's perfectly clean.

😂

you'll start to see stuff. welcome. 🙏

2
josamo8Ender 3 V2 | Structural scotch tape•

First prints are usually great. Just wait until it starts having problems

My printer has been totally unusable for a while now, because of a horrible clog. I unclogged it with an allen wrench, but now the bowden tube won't go in far enough because the coupler is fucked. So it immediately goes back to being clogged, and now I have to unfuck the bowden tube, too.

Get ready, because it will happen to you.

1
basicallyculchie•

I unfortunately have learned to keep a spare of everything, couplers are so delicate, I usually just replace them if I have to remove them. I spent most of a day trying to determine the cause of a clog a few weeks ago, got it going again, just took way too much work. It was the result of a poor spool of filament.

1
rambostabana•

With perfect leveling, temps and clean bed you can print on glass ez

1
jaykal001•

With you+

1
countach508•

Now start upgrading things! 😏

1
AGENT0321•

Too bad it was supposed to be an octopus....

1
thisguy1944•

You definitely don't even know what leveling even means if you use the word perfect. Do some research

-9

Downvoted for being an ass...

4