r/MSILaptops•
asm001

GE66 11 Gen Raider (Memory)

Discussion

So I bit the bullet and went for a GE66 Raider 11 Gen, upgrading from a GF65 - Thin 9th Gen.

Quick Question, the new machine has DDR4 3200 16GB (*2x8)

My GF65 - has DDR 4 2666 32GB (2x16GB)

Am I going to be nerfing performance horribly by swapping the RAM between the two ?

Can't afford 32GB of 3200 RAM at the moment lol.

As far as I can tell, my DDR 2666 , it is Crucial Ballistix 16.0-18-18-38-61 @ 1333 Mhz.
Dont know what the ram is on my new machine, yet.....

I'm assuming my new Raider may be able to OC the ram a little? Dont mind if it is not up to 3200 spec as I dont want to cook or break the memory controller.

Posted Sep 23, 2021, 12:36 PM UTC

54
bwyer•

Read this article. The short answer is no.

https://www.pcgamer.com/does-ram-speed-matter-gaming-amd-intel/

3
asm001OP•

Thanks :)

2
shahroozg•

I know it's a 5 m old post but how was your experience on ge66? I want to get 3070 I7 11800 16gb ram QHD. How are your temps and performance in general?

2
asm001OP•

Hi there!

Thanks for replying

As you'll see from this Mining Performance Image, it is pretty decent.

Graphics/CPU

Now I know Mining isnt the greatest indicator, and yes there are some missed shares, but as you can see from the screen shot, it has been up more than 24 hours mining reasonably reliably at 68 MH/s, which is pretty good for a 3070 laptop.

In that time it hasnt hit any limits (power/throttle/Voltage) and the GPU is at 100 % use. Obviously I'm only doing a memory OC as CORE on the GPU is useless for Mining.

I have disabled Turbo in throttlestop, so the CPU won't boost. When I want the extra oomph for gaming It boosts to 4300 MHz on all 8 cores and I have temps around 85C, again not Power Throttling or if it does, only slightly.

Things to note -
My Core/Cache undervolt on the CPU is only -0.42mV, again tweaking may be required.

As mentioned It sits on a cooling pad I've had for years, most of the time with Coolerboost On for these temps.

MSI/Nvidia released a VBIOS update for the 3070 pushing it to 140w - that got installed

​

I did buy a dual channel 32GB 3200 kit for it after all, means I can still use my GF65.

I got adventurous and repasted the CPU and GPU with thermal grissly Kryonaut within about a month (stock paste is crap)

Whilst there I also replaced the Thermal Pads (also crap) with K5 Pro Paste on GPU vrms.

Some People have tweaked far more than I have and I probably will "Meddle" again, I'm going to try with Phobya Nano Grease on CPU and GPU soon, the Kryonaught tends to dry out and go solid.... Plus the stuff I used was a few years old and had been opened, I don't know if that makes much difference.

Overall I'm very happy with it and have no regrets for my choice.

1