6th time on the blades is this easier with harder wheels? Mine are 80a

Posted Oct 6, 2021, 10:40 PM UTC

4217
DaneQweed:seba: CJ Carbon :rollerblade: Blank SK•

Anything 82A and down is really soft. Wears quickly and has insane grip as well as a slower roll which is why they are usually the wheels that come default. Get some 85A or higher and you'll be sliding in no time. It's roughly the same difficulty or more with harder wheels as you'll be rolling faster and the slip point is a lot earlier, so weight balance is more important.

One thing to practice is your one foot skating and transitioning from backwards to forward. You jump into the T-stop which can be super dangerous if you were on a really steep hill or some potentially uneven surface. It's not a bad thing, but if your pivot foot was any more sideways you might veer off not straight and fall.

11
Carch150OP•

Thanks for the tip

4
Moonshiner_JJ•

I heard so, but haven’t tried myself, still learning this trick, but thanks for showing me it is doable on 80a wheels, I wear 82a k2 wheels and I have been hesitant to practice these cuz of the softness of the wheels.

5
Carch150OP•

Yeah it was pretty hard at first but a little bit of speed is key and the lower you get the easier

2
Forsaken-Brief5826•

Can't hurt. 84a was easier than the 78 I started with

2
Carch150OP•

I would assume. What made you get harder wheels?

2
Forsaken-Brief5826•

When they wore down a bit I saved them for indoors and got harder for outdoors.

1
Carch150OP•

Dope

1
dantepopplethethird:seba: CJ Wellsmore•

80a is definitely quite soft for sliding. 84-86a is more standard for general street skating. 90a gets into speed skating territory (or aggressive skates).

There's a tradeoff with wheel hardness for sliding. Harder = longer slides. Softer = smoother slides. On smooth surfaces it matters less, on rough surfaces (especially with loose pebbles) you'll feel your blades rumble or "skip". When powersliding that "skipping" can be managed since you have a support leg. Parallel slides are more difficult to manage on hard wheels and if you're "skiing" downhill it's probably best not to go higher than 86A.

2
Carch150OP•

What’s skiing down

2
RiverNetxx:powerslide: Powerslide Next Pro 110•

Slalom carving, left and right to control speed

3
AutoModeratorMOD•

Reminder: r/rollerblading is a community for bladers of all skill levels, disciplines, and backgrounds. Hate speech, personal attacks, harassment, trolling, or breaking any of our other subreddit rules can result in a permanent ban.

If you see comments in violation of our rules, please report them.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1
Ripumanity•

Way easier. Try 85-86@. Personally I like 85a the most

1
TheRichardCabeza•

Make sure to rotate your wheels often. Stopping like that grinds them down a lot. I’d only stop like that in an emergency.

1
SkatemanJohnFR1 4X80 •

Your wheels aren't singular entities. They're little nomadic populations of polyurethane who want to break off from the hive and create settlements all over all the concrete and pavement in your city. And they want you to be well practiced with your emergency sliding stops.

7
Serene-Branson•

Or do it super often cuz it’s fun as hell and what are wheels for if not to destroy them in facilitation of your enjoyment

2
Carch150OP•

Thanks

1
Serene-Branson•

Not even joking, that’s my philosophy. But to answer your question, it’ll 100% be easier with harder wheels. I’d go with 85a

1