r/buildapc•
RafaIDG

Computer won't go past O.S. load screen

Troubleshooting

I built my computer almost a year ago and it worked flawlessly until 1 month ago when it stopped going past the O.S. loading screen after I restarted it. Windows tried to repair itself but it would reboot before completing it. I tried to install Windows 10 and Linux Ubuntu, the same thing happens.

here's the video of the issue https://youtu.be/Y-JLSSQK8I8

My computer use is mostly for work ( DevOps and programming) plus some gaming, so it's normal to leave the computer on 24hrs+ because I run some Virtual machines as well.

my build:

  • Mobo AM4 Asus TUF Gaming X570-PLUS (replaced under warranty because I thought it was culprit)

  • CPU AMD Ryzen 7 3700X

  • 2x 16GB DDR4 3600 MHZ

  • VGA Radeon RX 580 4G Gigabyte Gaming

  • PSU Corsair CV650

  • 2x NVMe Crucial (1tb and 2tb)

  • 2x HDD

  • Water Cooler EVGA CLC 240mm

  • Monitor LG 34 75HZ

Tests I've done so far:

  • BIOS Upgrade and downgrade, and several options like CSM enabled and not.

  • Tested a different VGA and Ram memory from a friend of mine.

  • The motherboard was replaced by a new one under warranty, they didn't say if they found anything.

  • Tried to install Windows 10 and Ubuntu(I tried low-resolution mode as well) on an SSD drive, without any of the others connected. Same issue, when the OS loads it crashes, so I can't even install the O.S.

  • Right now I have the minimum amount of stuff connected, a 120GB Kingston SSD, the VGA and one RAM memory, everything else even USBs and the internal speaker is disconnected

  • I tested small stuff like power cable, power port and even computer positions.

My current questions:

  • Could it be a second bad motherboard? I wouldn't be surprised if they sent me a refurbished one

  • could it be the PSU? but wouldn't the issue happen in different situations? or does it die when the VGA "pushes" it when the computer is turning on?

  • Could it be the processor? how do I stress test it ? Hirens boot would do the trick ?

Posted Nov 1, 2021, 7:34 PM UTC

212
OH650R•

This is definitely a strange one. Seems like when windows goes to initialize drivers, it just hangs.

Did you DL the latest windows installer to do the reinstall? If yes, perhaps try a older install package.

Another thought, before wasting a bunch of time DLing windows installs, try disabling some CPU cores in the bios. Check out this video.

https://youtu.be/YphdI1sUMcw

2
RafaIDGOP•

Will try this! let's see if I have any luck

2
OH650R•

Any luck?

1
RafaIDGOP•

Nope, it kept doing the same thing... I bought a new PSU and I'll buy a new processor as well and see if any of it is the culprit... I'm gonna build a new computer for my brother so nothing will go to waste... Will keep you updated

2
RafaIDGOP•

So new PSU didn't work.... New processor did work but I think I either have the worst luck ever or I did just fried my video card god knows how.

When I turned my computer on for the first time with the new processor there was some smoke and some fans running too wild, not even 5 seconds on..... So I turned it off, checked connections and found nothing weird, VGA stopped working... I replaced it with my brothers VGA and now everything os working fine but now I have a dead VGA here 🤡🤡🤡

1
OH650R•

Oh wow, something here is possessed I think. Did you happen to clear the cmos before the new CPU, just in case a setting was applied related to the old one that shouldn't have been on the new?

I appreciate the updates!

1
TheRedScaledMan•

I would say doing a freash install of Windows would sort it but it sounds like you've tried that. So I could be a hardware issue then. Did you wipe your drive before installing? Or did you just try to repair windows 10.

1
RafaIDGOP•

I really think it's a hardware issue.

When I try a new install, either Windows or Ubuntu it also restarts before I can select anything like it can't load it

1
TheRedScaledMan•

Could be the hard drive then. Could try formatting it using CMD and try. If you've got a spare HDD somewhere you could try installing it to that and see if it works. If so then its probably your drive.

1
RafaIDGOP•

I actually have a few SSDs, HDDs and NVMEs here, I tried a SSD that I used very little and I know it's working fine and the same thing happens.... Even with brand new sata cables and nothing else connected

1
TheRedScaledMan•

Strange. Maybe a mobo issue then or a problem with the connections

1