Connecting is infuriating.

Nanoleaf Setup

Every since the nanoleaf app update which deleted all your devices, I can't reconnect. Idk where the stickers are. The device codes on the back of the main device don't work. The hold phone near device feature is useless. It's just awful.

Posted Nov 14, 2021, 7:04 AM UTC

39
SpunkyR•

I have yet to be able to reconnect to my device, after multiple hard resets :(

2
ModernAutomataOP•

Since the last update you mean?

1
SpunkyR•

Yes

2
SpunkyR•

I fixed this. I read somewhere the nanoleaf devices have a hard time connecting to routers that use 5g and 2.4g. so I connected to my extender somewhere else in the house which just uses 2.4gz and it worked instantly. Hope that helps.

1
ModernAutomataOP•

A great tip. But one I discovered years ago. So that's not my issue this time. Appreciate the advice. But this time it was that big app update. It simply deleted all my connected devices.

1
ModernAutomataOP•

A great tip. But one I discovered years ago. So that's not my issue this time. Appreciate the advice. But this time it was that big app update. It simply deleted all my connected devices.

And let me tell you. Hard resetting nanoleaf is a damn chore when the plug is behind the entertainment center 5 -6 ft below your control panel mounted up near the ceiling. Seriously. How do they expect you to hold two buttons on that WHILE plugging the power plug back in.

1
RobertoC_73•

Is the app really deleting devices? I’ve seen the last couple of app updates prompt me to pair devices as if I didn’t have any devices paired. But I just press the Skip button and then press skip again on the warning that I need to pair a device. After I do this, my previous setup comes back and works as if nothing had happened.

2
truupR•

Welcome to the club. Nanoleaf is awesome... For 2 months. Luckily I'd saved a load presets so I just cycle through them. The only thing I can't figure out is how to change the brightness. So now it's like the power of 16 suns coming from the one side of the office room.

1
ModernAutomataOP•

I have three different setups spanning two rooms. One is panels. Two are canvas setups. I didn't know id need to save the pairing codes 3 years ago otherwise I would've laminated them and pasted them to my fridge or something. How idiocic.

0