2016 Triumph Thruxton R clunks into 1st and jerks forward slightly from neutral
Hello I'm new to Triumphs and I just got this bike and I've noticed that it clunks into 1st gear from neutral. It's has 1700 miles on the clock and I've tried adjusting the clutch cable from the top and it still does the same thing. It clunks when it's both cold and warmed up.
My question is, is this normal for this bike or does something need to be addressed? Any help would be appreciated
Posted Dec 6, 2021, 11:36 PM UTC
Take the question over to TriumphRat.NET (GREAT community)
That said, many talk about flexing the clutch a bit when the engine's warming up to get the clutch plates freed up. Triumphs (older ones--yours is not old) do clunk.
Since it's a neutral to 1st gear clunk, you are going mostly from stopped to rolling. There's some folks that like preloading the shifter a bit (lifting up on the shifter slightly before pulling the clutch). How loud is the clunk? If it's mostly just something you hear it's likely not major.
Also it might be the prior rider, didn't ride it too much even though it's logged 1700 miles , not ridden often--it's just getting its sea legs.
I'm wondering if it's just a matter of the clutch getting broken in. The gentleman sold it because he didn't ride it enough. I'll try flexing the clutch and go from there and if not hit up that site. Thanks
Honestly I think you've got it. Definitely pull the clutch in / out when in Neutral a few times during warm up. Do you neutral to 1 shifting when the idle is at the right setting.
I have a 2001 , carbed. My first 10 minutes are with a slightly faster idle to start the thing up and get warm
Oh another issue is the oil. A higher viscosity (thicker oil) will definitely help a great deal. How old is the oil in the bike. Technically at 1700 it doesn't need an oil change but if that first owner didn't ride much and they owned the bike with the same oil for 5 years, I'd definitely change the oil and go to a higher viscosity. Can't hurt.
I'm waiting on the filter and crush washer to come in, then I'm gonna do an oil change just to start fresh along with putting on new tires. I had the exact same thought as you soon after I made the post
Postings great--gets everyone's brain going and future readers have a menu of solutions. I've posted in other venues for clutch cables, throttle cables, head lights, blinkers, batteries, Mosfet Regulator, patch paint, chain tensioning, saddle bags, angling the handlebars, the clunk etc.
In another cycle, I had someone from Africa teach me how to do a top end rebuild on a 69 Honda. It was amazing sending pictures, getting direct information etc.