remarkable501•

Needle nose pliers. That should of the trick. Either that or two butter knives and use them like your using chopsticks for the first time.or even one of the flat black alligator clip things that you can squeeze.

3
aykillOP:steam: i5-9600K | RTX 3060 TI | 16 GB DDR4-2400MHz•

I dont seem to have needle ones, would normal ones be safer? And also How do the butterknives work? Don't know where to place em

2
HydraLM•

I myself use normal pliers to do this and I can confirm that they work perfectly fine

2
aykillOP:steam: i5-9600K | RTX 3060 TI | 16 GB DDR4-2400MHz•

Tried normal pliers, had to use a little extra force and its out.

Thank god now I can continue lol

1
remarkable501•

You just need to push the plastic tab in to where it unhooks from the clip. I think any kind of pliers would work. Just gently squeeze the top of the black part where the wire go in. Gently tug. You don’t want to rip or break anything.

1
aykillOP:steam: i5-9600K | RTX 3060 TI | 16 GB DDR4-2400MHz•

I tried being really gentle earlier, had to use some force for it to come out finally, the outlet looks alright, nothing seems ripped or broken.

2
remarkable501•

Glad it worked out for you. Happy building

2
Ok_Independent_1230i7 10700k | RTX 2070 | 16GB•

Push down the clamps and try wiggling it out. These are always a pain.

2
aykillOP:steam: i5-9600K | RTX 3060 TI | 16 GB DDR4-2400MHz•

I did, so many times I am getting so much resistance, the pin itself doesen't even as much as budge.

1
Agitated-Rub-9937•

what kills me is when the cord is short enough to go in but not long enough to take out

2
i_just_wana_dieRyzen 5 PRO 4650G - Quadro T1000 - 32GB 2933Mhz - 2 SSDs; 3 HDDs•

yeah bad cable management. it looks nice but there’s a reason it’s called management

1
Agitated-Rub-9937•

flat head screw driver to push and then lift.

2
tinougat•

Cut the wires, free yourself.

1
aykillOP:steam: i5-9600K | RTX 3060 TI | 16 GB DDR4-2400MHz•

Mate I cut the wire but the connector is still in lmao

1
tinougat•

Surely you can grab hold of and push down both release latches now?

1
leatherplates42069:windows: PC Master Race•

Wait, do you actually NEED to unplug this from the motherboard just to change out the PSU though? You can't just unplug it from the PSU and plug it into the new one?

1
aykillOP:steam: i5-9600K | RTX 3060 TI | 16 GB DDR4-2400MHz•

Nope, my old PSU wasn't modular so i couldn't simply replace the actual unit, though it would've made life easier.

1
NastyNative999•

It’s all about the wiggle. Push the latch in to release the lock and just slowly wiggle left and right slowly and they always come out.

1