Finished replacing my PSU but instead it makes clicking noise when turning on then another clicking noise when turning off

Tech Support

Posted Dec 31, 2021, 8:31 PM UTC

29
bagofrice_14win vista :/•

most psus tend to click a couple times upon installing. if it happens more often, I would check all the connections. also it could be that the motherboard failed but that's probably not the case

2
aykillOP:steam: i5-9600K | RTX 3060 TI | 16 GB DDR4-2400MHz•

Ok should I simply leave it on for a bit? Cause I turn it all off after like 3 attempts.

1
Drakconic314•

Check the connections if properly installed and according to the designation

1
aykillOP:steam: i5-9600K | RTX 3060 TI | 16 GB DDR4-2400MHz•

Done it twice, it's still the same result :/

1
Drakconic314•

faulty psu I guess

1

Start with the basic,s Use e jumper or tester for the psu to check him Then remove all ofters unneeded cables and try again

1
Danny2222_•

Im pretty sure that ticking sound you hear is the normal sound of a contactor / relay connecting and disconnecting the circuit, this is 100% normal and the first tick is just the psu turning on, the second tick is it turning off which it shouldn't be doing this could be a faulty psu or it could be the pc telling the psu to shut down which i think is the case based on the very limited evidence provided.

my gut instinct here is that i think the problem is that the pc isn't POST ing (Power On Self Test) and trying to fix the issue by rebooting itself, but the problem isnt going away so the pc just reboots again and again, unforchaently POST failures can be pretty much anything so you will have to see if your motherboard has some indication for POST issues if im correct, this can be the form of a little speaker you can plug in that makes beep codes, a 7 segment display on the motherboard or on the high end motherboards a screen, however...

what i would do if i was you, would be to see if you get any display output from this (basically do you get a boot logo which is a sign it got far enough down its POST tests to get to the GPU (typically the order is CPU, MEMORY (aka RAM), GPU, BOOT (this is where hard drives usb and eveything else gets done) so it may narrow down what you need to look up, if this and the post codes get you nowhere the next thing i would do would be to put your computer back as close as you can to how it was before you swapped parts out and then change things one by one

The worst faults

so when fault finding some faults are a pain to find and will sometimes show up as something else, these are the worst and so ill go through briefly the 2 most common ones

(as a quick note here: anything in brackets is just extra info, if its confusing try deleting anything in brackets a read again)

  1. CPU seating, the cpu has direct connection to pretty much everything that matters for bootup other than the OS itself (youll be able to get to the bios screen even with no HDD or SSD plugged in and you defo isnt that far) this means that if the CPU has no made good contact with all its pins you might get a error code relating to something else, most commonly RAM, this is because the pins that connect the RAM to the CPU are not connected correclty and so from the CPU's perspective that ram is misbehaving and so its says "its a ram problem" when achily its a ram communication problem, this can be nearly always be fixed by simply taking the CPU out and putting it back in, (as a side note, many motherboard issues are exactly the same as this and that is nearly impossible to figure out unless you have another motherboard to test with, sorry cant help you if thats your issue, youll have to ask for others help there)
  2. power, if you have a issue with power it will nearly always manifest itself as some other component issue this is because that component simply isnt being provided that power it needs and so dont work correctly producing errors (its alot like us when we are tired, we dont have the energy to work right and make mistakes) so make sure you have everything plugged in and fully inserted, sometimes it helps to insert and remove the plugs a couple of times as this scratches of any imperfections on the contacts on the connectors (i wouldn't do this on the 24pin motherboard connector tho as it puts too much stress on the pcb), i would also try testing with a different psu if you have one, and if not try reducing the load on the psu to see if it will stay on with less power draw (aka unplug things like hard drives, led lighting, fans (while i would never recommend ever doing this, i have recently updated my brothers pc's bios and i never bothered to install the cpu heatsink and it never even hit afterwards it happly sat in the bios at 50C this was a ryzen 2600X, so dont worry about unplugging all your fans (other than cpu cooler) as long as you dont go into a os it should be fine for any normal person). if this still dont work you can try reducing your wiring, any extensions that arnt 100% needed, plug the psu directly into the wall instead of a extention lead (i once had this kinda of issue and the root cause was a surge protector that had reached the end of its life) and only use the power lead that came with the psu as some aftermarket ones are not good quality and can also cause this issue

as ive said before all we can see and hear is a computer power cycling itself without any other info so theres not a ton anyone can do to diagnose it, as modern devices are highly complex and it only takes one tiny failure that cause something like this, sorry i cant give you a simple arnser but hopfully this points you in the right direction

1
imeanyhbutno:steam: PC Master Race•

If its only right after you start your pc up and nothing has booted yet its a relay switch which is very common in the rm series. I have it too and it works completely fine.

1
aykillOP:steam: i5-9600K | RTX 3060 TI | 16 GB DDR4-2400MHz•

Well, I give up, literally tried everything you guys mentioned here. Both outside reddit, its gotten so exhausting. May just ship it to a repair service and see what they can make out from it.

Thanks for your help guys.

1