x399 PSU connection

Build Help

Hi, on this x399 taichi board there's the main 24 pin motherboard power (ATXPWR1) in and there's two CPU power in's (ATX12V1, ATX12V2) and there's a GFX_12v1. So I plunged in the main motherboard cable on the board and then into the PSU, then I plugged in both the 8pin ATX12V1 and the 4 pin ATX12V2 on the board but I can't seem to connect these to the PSU.. I can't see where they plug in. They don't seem to have a place to go into the PSU. It's a fully modular corsair RM850.

Really didn't expect to have this problem, after all I can put a square thing in a square hole. Or a dome top flat bottom thing in a .. You get the idea.

Also shall I leave the GFX_12V1 unconnected because I'll be powering the GPU directly?

Posted Jan 5, 2022, 12:26 AM UTC

13
Lemus89•

the CPU and GPU power plugs in the GPU tend to be shared connections on the PSU side. since they are both 8 pins, and molex/sata usually uses a 6 pin connector.

The PSU should say 6+2 PCIE & 4+4 CPU as the pictures online show.

Most boards dont use a GPU power plug in the MB, and just power the cards externally through the plugs built in, and normal power spec provided by the MB

2
NormalEnglishManOP•

Ah yea thanks! I'll just power the GPU directly and leave the motherboard GFX unplugged for now.

As for the CPU power I think I've sorted it. The cables have wired connection patterns and don't all strictly match up to every little square or round top. I thought the pattern would be super strict so you'd have to match an individual square but no. They all go in nice with minimal force but some of the dome tops end up in full square holes. Seems strange but I can't see another way of doing it. Between the cable and the PSU all the connections match perfectly but on the board they really don't, and this threw me off a bit.

1
Lemus89•

ignore the square/trapezoid shape difference on CPU. I dont know why but thats how they do it, trapezoid fits inside square just fine. the actual pinout is correct for the 4+4 connector as long as you dont flip the cable for some reason like some people ask.

2