r/fosscad•
uranium3d

So ready to do a ScARpion. Now just to save my pennies and buy the rest of the parts

So ready to do a ScARpion. Now just to save my pennies and buy the rest of the parts

Posted Jan 8, 2022, 3:42 AM UTC

328

I’m printing the parts for the scARpion 2055 now. And a Mod9 that I’m gonna pair the chicks dig acrs brace with.

4
SteppedLessSnak•

Can you use that with a regular 22lr ar barrel or is it specific to that bolt. What it set you back? Thinking bout a tubee 22

2
GoochyAmnesia•

Ya I’m gonna do an ark next I got the bug

1
XGorlamiX•

You can get the parts from d-b firearms and a liner from brownells.

1
AcidCyborg•

It doesn't say so in the readme, but you can totally borrow the spring and follower from the included magazine for the Scarp. Just print the "20 round" extended magazine body and locking plates.

1
cursd_pew•

Yeah the springs in the cmmg/black dog mags are better than the ones in the readme. There's a 25+ round curved mag by EWW that's floating around in the scarpion room on matrix that needs the black dog/cmmg mag springs instead of the ebay spring too

2
Slightlysketch2297•

What other parts? Look up Common sense FCG only need the springs now for the trigger. Then for the barrel it’s just a single liner for 30$ and a printed barrel from the Tubee. It holds up ive dumped over 1k in mine that is pretty much 90% printed. Only thing that isn’t is the item your holding in the pic, IE the bolt is the only thing not printed.

1
neckbeardbrewing•

You’ve got the bulk of the cost right there

1