Thermal images; '20 M3P charging at home.
I decided to take the thermal camera out to the garage and see what I could see.
Charging port, charger, and house electrical panel.
Posted Jan 10, 2022, 5:25 PM UTC
I decided to take the thermal camera out to the garage and see what I could see.
Charging port, charger, and house electrical panel.
Posted Jan 10, 2022, 5:25 PM UTC
Could you do an experiment?
Someone on the Teslamotorsclub forum was trying to pinpoint wind noise and suspected it was coming from poor seal on the windshield. They turned on their heater to full blast then, after some time, used a thermal camera to find a heat leak at one part of the windshield due to poor urethane sealing. Apparently this isn't incommon. I want to do this on mine, but thermal cameras don't seem cheap. I have a 2020 M3P too and am just wondering if you have a perfect seal or not.
Infrared cameras are tools and while I don't doubt what you say is true, people also need to know how to interpret what they are seeing. The spot where this person saw heat escaping could be seeing heat but heat by conduction rather than convection. This is something where then they would follow up and verify that there is a void in the adhesive.
And I did have a Ford truck that did have improperly applied adhesive and when I pushed in the window I could actually see light from the inside. It also leaked water into the cabin as it was at the top.
My Tesla doesn't get delivered for a while and I do have have an infra red camera. I will play around with it and see what I see just for fun.
https://teslamotorsclub.com/tmc/threads/sound-deadening-model-3.130206/page-2
Here the post with the pics. This was definitely properly sealing.
It's all rated for a minimum of 140f/60c