r/G37•
AlexImHi

Help with code P0106

I have a 2011 G37 coupe. Engine light was on last week and it was P0106 which is for the MAP sensor. My mechanic cleaned the sensor and cleared the code. Came back on the next day so he replaced the MAP sensor a few days later (yesterday). He also checked for any leaks, etc.

Today a check engine light came on and I'm thinking it's the P0106 code again. Has anyone else had a similar experience? I trust my mechanic 100% so I doubt the cause would be negligence or bad quality work/parts. Any help/insight would be much appreciated. Thanks in advance!

Posted Jan 12, 2022, 1:22 AM UTC

18
MotorvateDIY•

In 2016 Infiniti issued a TSB about this issue:
https://static.nhtsa.gov/odi/tsbs/2016/SB-10075616-2280.pdf

It could be a simple as getting your ECU updated :)

3
AlexImHiOP•

Thank you very much, this helped a lot!

1
MotorvateDIY•

Anytime :)

1
HatoriiHanzo2011 G37 Journey Coupe•

I currently have the same issue. Have you found a fix? Also how do we get our ECU updated?

1
AlexImHiOP•

Yes, I replaced the MAP sensor and reprogrammed the ECU twice. I forgot the reasons but I believe it was one for hot weather and one for cold. My mechanic only reprogrammed it once which was why my light kept coming back on. After he did it a second time, I've had no problems since.

1
travisbicklesuncle•

I have a 2010 G37 with the same P0106 error code. I replaced it with a new Hitachi brand sensor, cleared the code via scan tool, and the code came back in about a week. I then tried to reset the ECU by using the gas pedal pumping method found on a few YT DIY videos and it got rid of of "check engine soon" light and I thought it would be good to go, a week or two later the light came back, scanned it and got the same P0106.

Now I'm really getting annoyed because I've read on other forums that it could be a bad MAP sensor, but even though I didn't buy OEM, the Hitachi is supposed to be one of the better aftermarket sensors. I don't want to have to buy an OEM sensor to only have the problem persist, it seems like I'm just throwing money down a pit. At the same time, if I take it to mechanic other than Infiniti service which I know I'll be paying out the ass, at least they know what the actual problem is. Anyone else go through this process and if so what was your final outcome?

1
AlexImHiOP•

So it turns out the G37 has two MAP sensors. My light kept coming back even after replacing sensor and resetting ECU twice. It was driving me crazy. My mechanic looked into it more and found out the 37 has two sensors. After replacing the second MAP sensor, the light hasn't been on since. Hope this helps you!

1
travisbicklesuncle•

Finally found out there's a TSB for this error code and you have to bring the car back to the dealer service to have the ECU reprogrammed.

1