How would you go about checking to see if a switch is going bad?

I work in a small office with 6 computers on a small LAN. Some users are periodically getting disconnected from our server, and have to log out and log back in and everything works after that. We have a Cisco SR224 switch behind our router which i believe is the culprit, but I am not sure if there is any way I can test it since it isn't managed. Any suggestions?

Posted Apr 16, 2012, 3:11 PM UTC

69
itreference•

If it starts hanging out with new switches that it never did before. It also might get a motorcycle.

14
jeepsterjk•

look for weird piercings and torn clothing as well.

3
crackerjam•

I believe the only way you'll be able to test it is by replacing it with another switch, and seeing if the problem persists.

3
dixmittyOP•

Yeah, that's what I figured. Thanks!

1
mcdeaglesandwich•

agreed, at that level is a pretty cheap test/solution.

1
vodenii•

You could set up a continuous ping to the switch and look for dropped packets or a diverse range of times.

3
dixmittyOP•

Good idea, I'll try that.

2
Flawd•

ping -t servername

If you didn't already know, that will ping till you Ctrl+C or close the command prompt.

3
rebootTHEsystem•

I like to add -l xxxx, i.e. -l 4096, sends a bigger packet across the wire so it works the switch a bit more

1