Reminder: Always check your gear. Snapped a bolt this morning.

Reminder: Always check your gear. Snapped a bolt this morning.

Posted Apr 18, 2012, 1:50 PM UTC

218
N3FFPhiladelphia Downhill•

Is that your kingpin? What trucks were you using? Edit: Actually it looks like your axle, regardless, what trucks?

2
wheemanOP•

It's one of the bolts that attaches the trucks to the board. It's a clean snap right at the head. This is the second one that snapped. Trucks are Indy 215s on an Earthwing Supermodel.

1
SirMarxismSoda Factory | Rayne | DFW•

Oh god...I can just imagine having an axle snap...the horror...

1
billdude916Honey Team Rider--DFR, H-Bomb.+many others•

SAME FUCKING HERE!

2
andy37Earthwing Superglider | Philadelphia, PA•

as a new long boarder, this scares the shit out of me. I am pretty good about checking my bearings, how does one check the bolts?

1
wheemanOP•

For truck hardware make sure that they are tight (but not over tight, you can put a lot of stress into the wood), no obvious signs of stress, and that they are all still there.

Kingpins: make sure it's not bent, no obvious signs of stress, bushings aren't cracked, and the nut is where you want it.

Axles: Not bent (to badly), if you have bearing spacers ensure that the nut is tight, otherwise the wheel should be able to spin freely without the nut being loose.

1
ObotoKebbek Niko Desmarais | Montreal, QC•

Broke the piece that makes the trucks turn on my original trucks (1st longboard). Can you recommend any model for carving and a lil bit of downhill?

1
kaziganthi•

I just broke 2 this morning too!, out for a nice easy parkade run. we called it early, it seemed like something didn't want us out there..

1