Impulse Equalizer Board Help
Hello r/paintball I am returning to the sport. Coastal Carolina University just gave the okay for a paintball club and hoping to play more frequently.
I play with a Old Impulse (sad to see how the company turned out) with an WAS equalizer board never gave me problems before. Now when the marker is turned on the led flash green and red (manual said eye modes 3 or 4 error which I don't use) and wont turn off until I pull the battery. Once turning it back on LED lights orange(start up) then red (competition which I don't use). I didn't bridge the equalink prongs but automatically switched to comp mode. Which shouldn't be possible.
Anyone have any idea? Or know if Witched Air Sports is still around?
Thanks and cant wait to get back in!
Posted Apr 22, 2012, 4:29 AM UTC
It seems like I had that problem at one point. I think the board does that when it thinks the breach is jammed. Could be caused by dirty/bad eyes or a bad connection to the board.
As for WAS, they went out of business a few years back so I don't know who you could contact.
Thanks. I think your right about the connection between the eye and the board. Took it all apart looks like the eye harness got pinched but didn't cut the wire. I taped them up and it works. But still bugs out hear and there.
Know where to get any more eye harnesses? Cant find them anymore.
I'm not sure where you would find another set of wires for an impulse. What you could do is get some 12 or 14 gauge wire and just cut the pinched section out and splice in the new wire.
Thanks looks like that what Ill have to do. Might try to call GOG and see if they have any extra laying around.