PSA: The Bluetooth on the Icom ID-52 won't pair with hearing aids due to missing BT Low Energy Audio profile
I've noticed a slight nuance in the specs advertising for the Icom ID-52. The radio is advertised to support Bluetooth 4.0 Low Energy, however I've confirmed with Icom's support that it does not support the Low Energy Audio profile that is part of the BT LE spec. I'm not sure why this is left out as all BT LE controller chips are capable of supporting the LEA profile.
The radio will pair with headsets and works fine in that manner, however it won't pair with the Bluetooth feature that is available on modern hearing aids due to lacking the BT Low Energy Audio profile. Hearing aids don't have large enough batteries for it to be practical for them to sync up using the normal Headset Profile or the Handsfree Profile.
I believe the issue to be a software problem as, to my knowledge, all BT 4.0 LE hardware supports the LEA profile. Icom could potentially fix this with a firmware update.
If you are interested in supporting Amateur Radio operators with hearing loss then please consider contacting Icom and asking them to implement this feature in an upcoming firmware update.
Posted Feb 8, 2022, 3:32 AM UTC