r/anycubic•
Zratch

Dur to filament stuck I’ve unscrew this and I can’t seem to bring it back down.

Dur to filament stuck I’ve unscrew this and I can’t seem to bring it back down.

Posted Feb 14, 2022, 5:42 PM UTC

1612
Arschleben•

It seems the connector has a cable tie, under the tab, cut it first, then push the tab down, and try, it should free the ptfe bowden tube.

7
ZratchOP•

Thanks. I noticed the Bowden tube ( learned a new term today ) has grooves in it probably from my failed attempts. I was able to remove the valve screw it back in and I think I’ve pushed the tube far enough. Ill give it another go

1
Arschleben•

Happy to be of any help, also, please take in count, the bowden tube is a consumable, there for is a good idea to have some spares in case something happens. I do not know if your printer came with a spare, they are really cheap.

1
ZratchOP•

Didn’t knew that. The printer is a few months old at this point. I’ve also learned if I pull the black tab the tube slides out… I’ll look into ordering some more as this one is playing with my patience

Edit : push down the black tab to slid the tube out. Pull it to “lock “

2
Arschleben•

Is part of the fun, tweaking it and improving, just be calm, it is supposed to be a hobby, so, take it like that. Have a great day! Happy prints!

2

Look up Capricorn Boden tube on Amazon. Probably one of the best brands of Boden tube you can get imo

2
zbysior•

what others said and also since you might have pushed/pulled on it a lot (considering you didn't remove the zip tie) I have a feeling you have bent the teeth inside the metal connector and you might need a new one

2