Can't access External Hard Drive data on other computers

Open | Windows

So my dad has recently been having problems with his old computer so he decided to buy a new computer. The problem is, a large portion of data on his 6 TB external hard drive does not show up when plugged into his new computer. He has been using his old computer for a while for this reason but recently, his old computer has completely broken down and refuses to turn on. We have tried plugging in the external hard drive into other computers, but we encounter the same issue. The drive shows up in Disk Management but I cannot seem to assign it to a letter as it is just greyed out. Any solutions to this problem?

Disk Management

File Explorer

Posted Feb 18, 2022, 4:58 AM UTC

16
Mrjimdandy•

Most likely it's locked behind admin ownership which would require the operating system the info is tied to, best bet would be to take the drive that his OS is on, install that and set it to top of your boot priority, worked for me when my CPU broke and had to switch over to another cpu and mother that already ran its own OS

1
aged-cartographer•

What was his previous computer’s OS?

1
RaylistsOP•

The previous OS was Windows 10

1
aged-cartographer•

The screenshot from disk management shows that your system is not recognizing a filesystem on the large petition. Which lead me to think that it may have been used on a Mac. That’s why I asked about the previous system.

Let’s check a few more details about the disk. Can you do the following and post screenshots?

  1. Run crystaldiskinfo and take a screenshot - to make sure that the disk is in good health

  2. If the disk is in good health, run list partition and list volume in diskpart and take screenshots. You can follow these instructions to run those commands.

1
RaylistsOP•
1
aged-cartographer•

The screenshots rule out the possibility of a damaged disk, it being write protected or it being bitlocker encrypted. Windows doesn’t recognize the filesystem on the 2nd partition in your 6 TB drive. This could be due to a few things. 1) if the partition contained a NTFS filesystem, the primary MFT is damaged 2) the partition is formatted in a filesystem that windows doesn’t natively support. 3) the partition could be encrypted using a software other than bitlocker.

1