r/chia•
dohimer

HBA Not Detecting 7th HDD

Edit: It appears that the drive is not working properly. It now has a loud vibration to it. I tried to initialize it on my chia pc and it came up with an I/O error. Tried in another pc and it also didn't work.

So I picked up an HBA card last year and have had 6 hdd on it ever since. I picked up a 18tb drive the other day on sale and when I plugged in the sata and power it is not being detected by windows 10.

This is in my plotting rig and the drive is empty.

I checked device manager and disk part and it's not in there either.

I tried it on the other sata plug coming from the HBA but no difference.

I do have 2 nvme's on the motherboard for temps and another 2 ssd's, 1 for windows and one was a drive to write to and then transfer to a storage drive but now it only take about 10 minutes with the madmax gui to transfer plots so I think I'm going to take that out.

Is there anything else I can check other then removing 1 ssd.

The only things I can think is the hhd is bad, I'm out of lanes or the sata connectors on the hba are no good (I'm doubtful on this one).

Posted Feb 18, 2022, 9:17 PM UTC · edited

35
gryan315•

check it on a port that is known to be working, and check a known to be working drive on the 2 ports that didn't work with that drive

5
dohimerOP•

Thanks I'll give it a try

2
dohimerOP•

So I checked the 2 cables and they work on other drives that I've been using. I unplugged my other ssd that I was transferring to and the 18tb drive works on that sata cable. I think I am just out of lanes

1

Might need a firmware update. If it’s an older card it might not be able to recognize it. Your sata cable could also be bad. I have broken a few just by bending it 90 degrees

5
babipanghang•

Older sata standards (sata II is I'm not mistaken) do not support drives larger than a few terabytes. Also, you could be dealing with the power disable feature of sata 3.3, which causes drives not to start if connected to a power supply that doesn't support is. It's an easy fix though, simply connect the drive using a molex to sata adapter: https://www.tomshardware.com/news/hdd-sata-power-disable-feature,36146.html

2