Does anyone make an 8-port BNC junction/patch box

General

I've been searching but I'm having trouble finding a part. I'm looking for a wall-mountable BNC junction box with 8 ports. I would be using HF -> ~900mhz. The idea is that it would be a patch panel between multiple radios and antennas so I can switch out which radio is going to which antenna port by moving jumper cables in the box. There would be 4 antenna ports and 4 radio ports.

Mounting location would be inside a watertight campershell in the back of a pickup truck. I'm trying to copy a setup I've seen in a radio truck made by ENG Mobile Systems, but they don't advertise where they source their parts. I'm pretty sure they used something off the shelf, as the ENG setup does not appear to be custom made.

It would be something like this, but with the connectors closer together and 8 of them.

https://www.stiweb.com/BNC_Box_Kits_p/cp1101003.htm

Does anyone know of such a thing?

Posted Feb 18, 2022, 10:02 PM UTC

85
alpha417•

Aside from sourcing the actual connectors , a waterproof enclosure and a backplate can be sourced at a big box/home improvement store for under 30 bucks.

Considering this being the ultimate in simplicity and all the connections being made on the user side, there really is no trick to making that. A steady hand with a drill and a good set of crimpers and you're on your way

3
silasmoeckel•

BNC's you can get in keystones so pop a 8x keystone metal plate in and go to town.

Mind you most panel mounts will go though and cover the keystone as well.

2
MultiplyAccumulate•

Make site you get the 50ohm version.

Also, those panels won't provide decent ground bonding if you aren't doing that elsewhere (e.f. polyphaser lightning arrestors)

Bnc connectors frequently require a D shaped hole, unless you get the 4 hole flange mounting style, and the punches for the D shaped holes are expensive. 19" rack panels are available prepunched. https://www.cablesandkits.com/ethernet/patch-panels/48-fp16-bnc-u/pro-4374/ Many configurations, 4 hole flange style: https://elitecoreaudio.com/elite-core-standard-d-series-punched-rack-panels/

They could be cut down to make multiple smaller panels.

1
VarimirEN43 [E]•

I use a 24 port patch panel in the shack. It was around $35 if I recall correctly. Not the form factor or port count you are looking for, but it might give you some ideas.

1
talkstoaliensFN11 [EXTRA]•

I made one with 8x SO-239 to BNC panel mount cables from Amazon. Still need to label the ports, but it looks good and is probably the cheapest option if you’ve got some basic tools.

1