Questions about casting
I'm looking to start sand/plaster casting copper and brass. I've been doing a little research on this myself, but would like some questions answered before I begin purchasing the remainder of the materials.
I have access to a kiln that is capable of reaching the required temperatures (above 2000F), however the instructions for the device only mention caveats with working with glass and ceramics. Are there any concerns I should have if I use this to melt metals in a crucible? Basically, is it a horrible idea to use the kiln for this purpose?
Speaking of the crucible (I'm gonna go with graphite): I've read that it's recommended to have a separate crucible for each type of material to avoid contamination. Is this really that necessary? Don't the impurities either burn off or float to the top during the melting process anyway? If not, is there a way to clean the crucible of contaminants after it has cooled?
About the mold materials: I'm not sure what materials I should use. I'm going to be doing rather crude designs at first to get the hang of the process, but hope to progress to much finer details. I've noticed that most sand casts end up with a gritty texture meant to be filed/milled away. Would I be better off just using plaster?
Posted May 2, 2012, 7:55 AM UTC