New (old) skater

I’m a middle aged dude who used to skate a ton when I was younger. Ive always snowboarded a lot and can throw down. I’ve been itching to get back to skating. Mostly as a form of exercise. I can still cruise, ollie, shuv-it, but here’s the dilemma.

There’s a new pump track by my house and I’d really like to get into riding it, however I am literally bigger than the average NFL player @ 6’5 and 290, so I have issues with trucks/bushings.

Generally bushings will wear to my heel side and result in the deck pulling that way, pretty aggressively.

Are there gear recommendations or different things I should be doing differently to adapt my size to skateboarding? I get that I’m not gonna throw myself down stairs or anything like that anymore, but it’d be cool to build back up to riding a mini ramp/flat bar/basic flip tricks and be able to tackle that pump track.

Posted Mar 5, 2022, 2:49 PM UTC

313

Not a big guy myself, but from what I have heard look into changing your bushings. That is the place you get the most control.

Big guys seem to like bones hard bushings, but you can also combine hardnesses and shapes . It is actually kind of endless what you can do to tweak it.

Other than that, buy quality so it is less likely to break due to cheapness.

3
Odd_Ad_94•

Hard ass bushings and truck geometry that isn't as carvy. Sounds like a bones hard bushing and venture mid combo to me. Just make sure you don't get lows. The bones hards do not fit on lows. My kingpin nut is halfway unthreaded on them and after every session I have to tighten em. But damn is it a safe combo for bombing hills.

1
drumocdpOP•

Thanks!

1
scatrr•

Bones hardcore hard are not gonna be hard enough. Look for the hardest rating set you can find at the lowest cost. Most sets have a cylindrical bushing that goes closest to the board, then a conical bushing that goes furthest from the board. This won't work for you. You need 2 hard cylinders bushings and no conical shaped bushing at all. This might mean you have to purchase 2 sets to get a total of 4 hard cylinders. This will work 100%.

Progress carefully, learn how to fall correctly, and wear high quality maximum protection due to larger impact forces when you fall. Good luck.

2
drumocdpOP•

This makes a lot of sense I’m gonna give that a go

1
xvs650•

I’m over 6ft and at 130kg. I just kinda dealt with the looseness of the trucks at first until I broke in the bushings then slowly tightened over time to not put too much stress on the bushings. I still get quote a bit of lean, whereas my brother who’s 80kg has been on my board and found it tight. Unfortunately, I’ve tried riding some mates boards who have hard and tightened trucks but I still get quite a lot of lean. To combat the inconvenience, I just put wax on the board where the wheels sit to help with wheel bite.

1
drumocdpOP•

Good call on the wax, I think I’m gonna pair this with those hard bushings.

1
Jezzmund•

I'm wondering if some soft riser pads would help take some of the pressure off the bushings.

1
drumocdpOP•

That makes sense, I’ll give it a go.

I assume you saw I followed you, i found your posts really inspiring on r/oldskaters and wanna keep up on your progress.

1
sneakpeekbot•

Here's a sneak peek of r/OldSkaters using the top posts of the year!

#1: My daughter just pushed me into hitting my first vertical drop in. 7 & [42YO] | 71 comments
#2: Sometimes we learn the hard way, but we keep going. [61YO] | 70 comments
#3: Ollies, Day 33 [61yo] | 71 comments


^^I'm ^^a ^^bot, ^^beep ^^boop ^^| ^^Downvote ^^to ^^remove ^^| ^^Contact ^^| ^^Info ^^| ^^Opt-out ^^| ^^GitHub

1
Jezzmund•

I did. Thanks so much. Been skiing and snowboarding lately but will be back skating soon.

1
drumocdpOP•

Saw you’re on ice coast too, hopefully you’re getting after this storm, Unfortunately I had to miss this one.

1
Jezzmund•

I'm in So. NH. All rain here. Will be planning a trip further north before the season ends, but it's nearly over for me.

1