Suggestions for an ice hockey player looking to go inline

Question

Title says it all. I've been skating a lot for hockey this winter and want to transition to something for the nicer weather once the rinks close. When I was a kid I was all about inline, and had some aggressive skates I'd take out to the park all the time, but thats a long time ago and I don't know my ass from my elbow on it anymore.

Ideally, these would be skates I could rock at a skate park or in a ball hockey game, if such a skate exists. I don't really want to spend like crazy either, since I don't know how I'll do on street vs ice.

Thanks in advance

Posted Mar 9, 2022, 7:32 PM UTC

39
Stressed_era•

I was looking for something similar not long ago, not really something for a skatepark tho. If that's what you want you could get pretty much any aggressive skate and put a ufs big wheel frame on it. Ufs stands for universal frame system. A good option would be the compass 72 mm frame (which also fits 76mm)

Compass also makes an 80mm frame.

But the reality is if hockey is your focus, I would get a hockey skate, and then worry about if you want aggressive skates later. Unless you're just messing around I wouldn't want to use aggressive skates for a hockey league, even if they have a big wheel frame.

4
shawskating•

Hmm, the use cases for an aggressive skate vs ball hockey skate are pretty different, you'll probably end up compromising on one functionality or the other (or both) if you want one skate to do it all. One option: you could get an aggressive boot and then get an inline frame for your hockey boots, something like Marsblade, or just start with the less expensive option to get back into it and then go for the other if you like the first one. Just tossing some ideas around so you don't try for a do-it-all skate that compromises your experience of both options!

2
fleetwalkerOP•

Is an aggressive skate the only way to get the rail gap in the middle? The inline hockey skates look good to me if they had that. Like my preference I think would be a lighter boot and taller wheels but the ability to hit a rail is fairly key. Or do you like remove wheels maybe? Just a guess.

Either way thanks for the info.

1
TheRazorsKiss:powerslide: Powerslide Imperials, Alkali RPD Lite R, Roces M12•

You need the antirocker frame for that gap, yeah. To do both, you'd need a boot that can mount multiple frames - but tbh, you're probably going to hate a hockey boot trying aggressive, and an aggressive boot for hockey. I play hockey myself, and have dabbled some in just about everything over the years. You can probably make a big wheel boot work for grinds with a plate and an antirocker frame, but the hockey skate is going to be a whole other animal.

1
fleetwalkerOP•

Alright so let me know if I'm right and clear: the antirocker is the grind bar gap thing and that's only on aggressive skates. The frame is the wheel cover with the antirocker on it, and I theoretically could get something that is both big wheel with a rocker by getting a frame with a rocker and putting it on a big wheeled boot. But you don't think I'm gonna really achieve want I want with either and am better off getting 1 of each depending on what I intend to do. What is a plate? To me big wheels and ability to grind is more of an interest for day 1 on skates, because that's what's available to me, do you have a type of skate other than aggressive that might be more ideal? Getting ice skates was so much easier, thank you for your help.

1
TheRazorsKiss:powerslide: Powerslide Imperials, Alkali RPD Lite R, Roces M12•

the antirocker is the grind bar gap thing and that's only on aggressive skates.

Correct.

The frame is the wheel cover with the antirocker on it, and I
theoretically could get something that is both big wheel with a rocker by getting a frame with a rocker and putting it on a big wheeled boot.

Not quite. You can use the same boot for both big and antirocker aggressive, but they will need different frames, which could be mounted to the same boot. An antirocker frame has smallish wheels on the outsides (like 60mm) with much smaller wheels on the inside, like 45mm, which are mounted to either side of the grind surface/groove - the gap you're mentioning. Additionally, there is a soul plate (a large protective plate) mounted beneath the boot for aggressive skating. A soul plate is grinded on as well - sliding the bottom of the skate across curbs, rails, and the like, and is mounted below the boot. It keeps the bottom of your boot from being shredded.

A big wheel frame has three (or 4) very large wheels (100mm-125mm) - and the two frame types are very much opposites. The center wheel in a big wheel setup is right where you'd put a grinding groove, so you can't use those frames for grinding.

Now, that being said, you *can* do a 4x flat (as opposed to antirocker) setup with a smaller grind groove - but they tend to use something like a 4x57mm setup - cf: USD Sway Team 57s. That will, however, be precisely the opposite of a big wheel, again, because it uses tiny wheels in order to incorporate the grind groove. You *can* use the same boot to do *either* grinds *or* big wheels - but you'll have to have two frames, with their associated wheels, to swap out on the same boot - and put on a soul plate when you swap to the aggressive frame. Also note that a big wheel boot is meant for *distance* comfort, while an aggressive boot is meant to be a tank that will take the hits and abuse grinding incurs.

This is also assuming that you mean 110/125 triwheels when you're talking "big wheels". The reason most people don't use, say, 100mm outer wheels on grinds is because the frames for larger wheel setups tend to be longer - adding in the groove in the center would make them longer still. Further, the bigger wheels make it so you have to jump higher and further to clear the larger wheel diameters on obstacles. Aggressive setups have small wheels, and blocky setups because you're trying to give yourself "flat" profiles on the bottom of the boot (and the sides, to some extent) for sliding on stuff, and everywhere else except that singular grind groove for rails and curbs - with small wheels on the inside to help "guide" you to that center groove. "Rockering" is having smaller wheels on the ouside, to make turning faster/easier. "Antirocker" is having smaller wheels on the *inside* to lock you in on grinds.

TLDR; big wheels and grinding are sort of opposites, and use completely different setups. Big wheels are to eat up distance, and to improve efficiency in covering ground; aggressive skates use smaller wheels and beef up boot protection to be more agile and add the ability to grind on all the things without catching the wheels on everything and biffing it. The boots can be interchangeable *to a point*, but only to a point, and only if you're not going to be worried about a moderate performance hit for whatever type of skating the boot *wasn't* intended for.

1
TheRazorsKiss:powerslide: Powerslide Imperials, Alkali RPD Lite R, Roces M12•

While my other reply has a bunch more info - what I would suggest is to to pick up an aggressive skate first. You can't do aggressive well with just about anything else, but you can mount another frame to it later for big wheel action, if you want.

Many aggressive skates have UFS mounts. Find one that does. A Kizer Trimax 3x110 frame (UFS), with wheels, is like 105$, if you want to add that capability later.

1
AutoModeratorMOD•

Reminder: r/rollerblading is a community for bladers of all skill levels, disciplines, and backgrounds. Hate speech, personal attacks, harassment, trolling, or breaking any of our other subreddit rules may result in a permanent ban. If you see comments that violate our rules please report them.

Be sure to check out our spin-off subreddits:

r/aggressiveskating

r/rollerbladingmemes

r/inlineskating

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1
AnchoviePopcorn•

I’ve got USD Aeon 80s. I play way more hockey in them then I do skate at the park.

I would recommend them if you’re trying to do both except for the soul plate being a little wide (some times it catches when I turn real sharp when playing).

You definitely want to stick to a flat setup and one that can accommodate the larger wheels.

1