r/SolarDIY•
timascus

Solar Energy Solution

Greetings all,

I need to determine a solution for 3.6 kWh of stored energy. I've come up with a few options, but don't know a ton about this world. I'd like a few opinions on my options below as well as what you would do. I'd like this to be portable, but am willing to sacrifice some portability for price.

Requirements:

  • 3.6kWh stored energy
  • Semi-portable
  • A/C Outlets

​

  1. EcoFLOW Delta Pro Portable Power station. 3.6kWh of stored energy. $3600 and I'd have to buy solar panels. Is there anything else I'd have to buy? This solution is fairly plug and play it looks like.
  2. Create own system. Buy two Renogy 12v 200ah (2.4kWh) batteries for a total of 4.8kWh of stored energy for $2000. This SEEMS cheaper, but I have *no* idea what else I would have to buy. Wiring? Fuses? Inverter? I'm confused and Renogy won't answer the phone :).

What would you do? One of the above solutions or something else?

Posted Apr 5, 2022, 7:13 PM UTC

718
Scoger•

If you create your own system, you'll need panels, wiring, fuses, a charge controller, and an inverter to go along with your batteries. You'll have to decide if you want your 12V or 24 setup, which will help you determine what inverter to buy. You can get an MPPT/Inverter box that will save you money and make the configuration easier.

i would check out some of Will Prowse youtube videos to help explain what you'll need. He does a great job of explaining/reviewing equipment.

2
timascusOP•

Thanks for the recommendation. I’ll check the channel and the equipment.

1
el_camo•

Bluetti is the best in my opinion.

2
timascusOP•

I haven’t seen them at all. Will check them out!

1
porchlightofdoom•

For the Semi-portable requirement, the power stations like the EchoFLOW or one of the many others reviewed on YouTube are the way to go.

1
nursereedrn•

Ecoflow or Bluetti? That is the question...

1
timascusOP•

Thank you!

1
infamousdx•

Do you want to pay for the convenience of the retail solution or would you rather DIY? I think that's the biggest question.

DIY will always be cheaper but obviously it will take some sweat equity and a lot of reading/watching. I wouldn't call it difficult though. I went from knowing nothing to building about 5 different capacity setups in a few months of watching Will Prowse and LithiumSolar and a lot of reading.

1
timascusOP•

Thanks friend. I’ll check out those channels.

1
[deleted]•

[deleted]

1
timascusOP•

I appreciate this as well. I’d love to see what you think would be appropriate for a system that has 2 2.4kWh batteries.

1
sox3502us•

Biggest issue with the eco flow is if something breaks or goes wrong with it after warranty expiration you might not be able to fix it whereas with a build it yourself system you can fix it if things break much more easily.

1
timascusOP•

Yes this is a concern of mine as well. Prebuilt look great until they don’t work and then you’re screwed. I’m thinking of iPhones without interchangeable batteries or shark vacuums

1

An important question might be how you arrived at needing 3.6kwh of storage. Is that the nominal energy you need, or the maximum, or the minimum? Is it something you need every day, or once in a while during a blackout?

It makes a difference to consider the average depth of discharge vs the maximum expected discharge etc.

1
timascusOP•

I tried posting here earlier about why and instantly received 3 negative replies. I deleted it and started over. Suffice it to say I need 3.6 kWh

Edit: I do appreciate you asking

1

Sure, but 3.6kwh needed sometimes is different to 3.6kwh needed every day. Even with the best battery chemistries you'll get a reduced battery life if you do 100% DoD every day, but if you do it once in a while, it might be ok.

Maybe there's a reason you received negative replies?

1
farmerjllc•

This is exact reason why lithium iron phosphate is awesome. I think the latest Eve cells sat they can discharge 100% 6000 full cycles before loosing 20% capacity.

1

yeah, they appear good on paper. I have heard that they are affected by heat about the same as other types too though. so 100% cycles at 0.1C might be ok, but 100% cycles at 1C might shorten the life.

The point was that knowing more about the system and use case can only help OP, so being cagey about it is counterproductive.

1
timascusOP•

It would be needed infrequently.

1
[deleted]•

[deleted]

1
[deleted]•

[removed]

1