Void elite wireless not detected in icue 4

Help

UPDATE

Turns out icue4 needs to run as administrator before it'll detect the headset. REALLY stupid but definitely overlooked.

Good news:

After much difficulty and irritation, I actually got icue 4 installed and actually launching WITH windows which makes a pleasant change.

See my previous post for details:

https://www.reddit.com/r/pcmasterrace/comments/trfpc5/why_is_my_installation_of_icue_so_messed_up/

Bad News

iCue 4 doesn't detect my headset.

The previous version identified my headset as a Void Elite Wireless which is allegedly supported in icue4

So where's my headset?

Device Manager has it; it works (I can hear audio through it, everything lights up that should...

So what gives? Why is this software so crap?

Posted Apr 5, 2022, 7:27 PM UTC · edited

15
AutoModeratorMOD•

Need help with a Corsair product?

Many common questions and answers can be found on the Corsair Support FAQ: https://www.corsair.com/ww/en/FAQs. Or if you would like assistance from a Corsair staff member on your product, you can check our knowledge base and submit tickets using our Customer Support Portal: https://support.corsair.com/

Looking for additional help, or for help on your ticket? All technical support-related posts must be posted in the weekly megathread. This is so that we can better assist you.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1
wtathfulburrito•

I have the same headset and it definitely works with 4. It does require a firmware update though. I would install 3, force an update and see if that works. You I have to be physically connected though and I’d recommend going to a mobo mounted port. Was it correctly recognized in icue3? Is it in boot loader mode? Have you tried a hard reset? Do you hear the mute tone when you lift the mic boom?

1
PruneCorrectOP•

I updated firmware to 0.08 per the version 3 software before I installed version 4

Was it correctly recognized in icue3?

Yes

Is it in boot loader mode?

Don't know... don't know how to check

Have you tried a hard reset?

I wanted to re-pair with the dongle but I can't figure how to do it; have tried removing the device from Device Manager, and reconnecting it... didn't seem to change anything

Do you hear the mute tone when you lift the mic boom?

Yes, and I hear audio through it as well; apps, games, youtube... can hear it all fine.

1
PruneCorrectOP•

Update:

Not in bootloader mode; seems to work fine.

Actually managed to re-pair it - no change.

Did all this with info from
https://forum.corsair.com/forums/topic/118415-psa-void-wireless-in-bootloader-mode-and-how-to-recover-it/

1
wtathfulburrito•

this is something I deal with CONSTANTLY. its VERY annoying. I just realized that I have the RGB Elite Wireless, not just the void elite.

One of the things I had to do was to force update the firmware on both the dongle AND the headset from icue. then completely reboot the PC and go back into icue.

its super finnicky (iCue) and I haven't found a replacement for it that works well. opneRGB does some things, but not really headset stuff. atleast not last time I looked. but it windows sees it, atleast you can use it.

1
griffusrpg•

Hi, I bought a Corsair Void Elite Wireless today, I've download the last iCue 4.24.193 , and I believe I have the same problem. I cannot make that iCue detect the headset. Windows detected just fine, and the hardware works normal, but is with iCue that I cannot solve how make the software detect the product.

Maybe you already figure it out how? Thank you for your time!

1