r/buildapc•
IC3SO

Troubleshooting VGA light on motherboard

Build Help

Have been building my new computer for a couple days now and am stuck on this.

The VGA light (per the manual) is where my computer is getting hung up.

I have in no particular order

  • Reseated the graphics card
  • tried booting without graphics card
  • tried booting with old graphics card
  • tried booting without SATA drives, graphics card, and only 1 stick of RAM (m.2 drives still connected)
  • reset CMOS

I was unable to try another slot due to space constrictions on both my new and old GPU.

When I start up the computer the fans on the GPU will start up, then stop, this is normal behavior when not under load though right?

The CPU is i7 12700k, which to my understanding should have integrated graphics.

GPU is 3070ti, and motherboard is Gigabyte z690 UD ddr4 with a 1000w platinum power supply from Corsair, so power shouldn’t be an issue.

Any ideas what could be the issue? Anything else I should try?

Sorry if this is the wrong place

Edit: got into BIOS with HDMI attached… I don’t understand what happened but if anyone has clarification on that it would be appreciated.

Posted Apr 6, 2022, 2:39 AM UTC · edited

10

No comments yet

Nobody commented on this post, or the comments weren't captured.