hairyb0mbISA Certified Arborist•

Pray to the tree gods

8
lostINsauce369•

Hmm. Is the wire still in the wood? You could try using a chainsaw or something similar to cut into the wood perpendicular to the wire, enough to sever the length of wire and then try to pull the wire out. The relatively small wound you create is nothing compared to having the main trunk girdled to death.

3
Amek206OP•

Was able to get all wire out. It's sounding a little grim for the tree. Guess we will have to wait it out and see.

2
Tom_Marvolo_TomatoISA Certified Arborist•

I once did a consult for a major subdivision. The HOA wanted me to diagnose why their pines looked so bad. The builders had planted a huge number of Scots pines along the main road as a sight-barrier. The company that got the bid to plant the trees did not win the bid to maintain the trees, so they neglected to tell the new company about the stakes they had wired to each tree. I lost count at 100 pines that looked exactly like that trunk, if not worse. They all died...

3
Amek206OP•

Aww, alright thanks for the info. 100 of these as a sight barrier is a expensive mess up!

Guess we will have to wait and see, thanks for the info.

2
AlienAntFarmer2•

If you removed the wire then just leave it be. It looks like it’s doing fine and will heal as time goes on

2
beebs914•

Incense cedar? I’m surprised how wide the diameter of the tree is above the girdled area

1
education•

This looks like a Hinoki Cypress. Would be able to tell if there was a clear foilage picture.

3
Amek206OP•

Hmm, possible it is. Smells very strong when you are in there.

Yeah, so the circumference of the smaller is 12 inches and the upper at a leveled out spot is 17 inches and indents a whole inch into the tree. Don't want this thing snapping in the wind on the sidewalk it's near. We are going to see if we can find any info on possible help for it.

1