Source
r/Minecraft•
Someguy101

Redstone timing help needed

Redstone

I need a set up where after triggering a pressure plate a timer starts for an adjustable amount of time. After that time runs out a redstone lamp is then unpowered for an adjustable amount of time. The lamp should be on by default.

So pressure plate triggers, after some amount of time the light turns off for an amount of time and then turns on again.

If anyone can provide advice on how to do this I would be very grateful for your help.

Posted May 9, 2022, 5:41 PM UTC

15
mynameisperlI shovel well•

Depending on the length of the delay required, there are many variations...

https://minecraft.fandom.com/wiki/Redstone_circuits/Clock

1
Someguy101OP•

I was able to get it working the way I wanted with a falling edge monostable circuit connecting two hopper clocks and using the and or not gate, not sure which it is but it works now. That was the piece I was missing so thank you for pointing me in the right direction.

1
mynameisperlI shovel well•

No problem, have fun...

1
BananaArcher72•

Hook up the pressure plate to a pulse extender, then that to a not gate, and the output through a bunch of repeaters and to the lamp

1
Yrense•

I suggest using either hopper clocks or pulse extenders for the lamp’s activation and deactivation. As for the lamp being on at all times, that’s a simple signal inverter.

1