seems she finally gave up at my work no less. goodbye for now 2nd gen

Posted May 23, 2022, 12:13 AM UTC

Posted May 23, 2022, 12:13 AM UTC
Junkyard would be your best friend in this case, I had a 86 ramcharger did the same thing. I found a replacement drive shaft for about 50 bucks and new ujoints 5 dollars a piece. Luckily it doesn't require a lot of tools to remove one just 4 bolts on the rear flange and slide out the yoke with it.
I've checked all the ones that are half an hour from me online and can't get anything to pop up. So I'll just have to do the look my self at those places hopefully.
Might have to, and do your homework on it different models may have the same part as your truck. Dakotas and Durangos have some similar parts that the half ton trucks have just depends on the engine sizes of those.
Wouldn't be the first time I've had to do homework to fix this truck. It all went down hill after I overheated it in January because some water froze. Atleast I'll have time after Wednesday until the June2nd.
I feel ya I would much rather keep up with problems that are already known. Then blindly jumping in to drive cheap replacement with new unknown issues. Overheating an old dodge truck isn't too bad the magnum engines have kept dragging me to work limping by for a long time. Only time to get worried about your truck really dying would be transmission issues.
May have found the cause of that low speed squeak especially in reverse
Ya know it would squeak at low speeds. Thought it was something else though till I heard a thud at a stop light while pressing the gas held on long enough though to get into the parking lot.
They don’t always give you a lot of warning and the trucks are so quiet nowadays you don’t always hear it at least she didn’t leave you in the street
Yeah I was greatful for that since I was at one of the most busiest intersections that city has.
New truck is more expensive. Get a loan from your folks and fix it.
That's one of the problems my dad doesn't want to deal with it much longer after four months of trouble first with it overheating in January from frozen water then failing starter in March then battery being angry that it's terminals are slightly dirty this month and in april. Was all fine for the past two years. Second problem is that he doesn't want to spend 20 grand on a new truck when we can get a car cheaper with better mpg.
Or yall can just fix it. Fixing an old truck that you know the history of is always cheaper then buying something else.
I've had the same truck for 12 years. Same old truck I bought when I was 15. It takes effort and patience.
And have something else go yeah. My dad and step mother is set on just getting me a car to last through my two years of college. Even though they just have to pay for the insurance on the truck. They want something where I don't have to fill up ever week. I can't change there mind.
All I know is if you let the truck go, you'll probably regret it.
Seen it too often over the years.
If you can find a used Volt go for it, it'll use almost no gas for around town driving and still gas engine incase you need to go far
If it's the 2019 one the battery would fall to zero as it's a 60minute trip for me there and back that also doesn't include if I have anything else to do in town. Only upside would be the mpg's.
Meh. Universal joint. I replaced my first one at age 13. Should be a 1/2 inch wrench. $15.00 part. Take you an hour, tops. Back to work, dude.
Seems you didn't see one of my other comments, but it ate through the driveshaft joint so it's not that simple.
Ah. Maybe get one from a junkyard?
Yeah I'll have to eat the cost but at the same time my dad will say it's a waste of time and where getting you a car anyways. I'll still try and find one though.
F
Dude it’s just a Ujoint
It ate through one side of the joint something that ain't easily fixable and it's $400 for a new one something a highschool student doesn't have.
How long has that ujoint been fucked for it to eat through the mount?
Also you can get an entire driveshaft on ebay for around $100 used.
I have no clue how long its been eating away though it's been squeaking for a long time if that has anything to do with it. And where are you finding a rear driveshaft for $100 used on ebay? All I can find for around that was the front driveshaft and parts to repair it.
https://www.ebay.com/itm/194971772253?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ZaZ6yl_MTPO&sssrc=2349624&ssuid=7uC7jTs7Qtu&var=&widget_ver=artemis&media=COPY
There's one. You'll have to comb though the used listing but you can find just about anything on there.
Go to a junkyard. Literally any will have second gen dodges everywhere. You can probably get an entire new setup from another dodge for like 50 bucks, then buy two u joints brand new and put them on. If you can't afford that just put the parts from the truck on yours
A high school student should have 400 bucks
I worked full time in high school to afford my $700 car, insurance, gas. That was 20 years ago when gas was under $1/ per gal, and min wage was the same $7.25 per hr.
If you think $400 is easy for a high schooler, then is sounds like high-school was pretty cushy for you.
I currently work and am in high school, it depends what you do but I work every day. Everyone who I know that works blows money shopping every Saturday so it seems like it’s not just me
Lol what, 400$ is a lot to a high schooler. Especially when they don’t make a lot of money to begin with, an if they pay for there own gas and insurance.
$400 is a lot for many adults.
Not this one especially when I was filling the truck every week at $55 and Im only making about 300 a month since where I work there's not much to do and I'm only there three days a week for 2-6 hours.